Pallet Deal of Flowpoint ECO Charcoal (56x 25Kg bags). Free Delivery 🚚

Flowpoint Eco Technical Information

• Contains recycled glass – reduces virgin aggregate use
• Open to foot traffic in 1 hour
• Open to vehicular traffic in 4 hours
• Rapid set with exceptional bond strength
• Shrinkage compensated
• Mixes quickly on-site with water
• Initial set after 15 minutes at 20°C (Cool temperatures retard, warm temperatures accelerate product performance).
• Economical to use
• Conforms to BS 7533
• Ideal for large-scale & domestic projects
• Available in 25kg paper bags
• Comes in Charcoal and Natural grey
• Flowpoint ECO is ideal for projects looking to achieve an ‘excellent’ CEEQUAL award, or where a BREEAM assessment is to be carried out.
• NBS Plus registered for ease of specification

How do I mix & apply Flowpoint ECO Paving Grout?

Follow these ten easy steps to use Flowpoint ECO slurry grout to fill paving joints:

1. Clean out the joints and paving slabs so they are free from debris and any excess ponded water
2. Pre-soak the paving joints & surfaces with water to ensure they are damp – a light spray of water is enough, you don't want to over-water
3. Pour the Flowpoint ECO powder into a bucket and add 4.25 litres of water
4. Mix with a paddle mixer for around 3–5 minutes, until the consistency is smooth and free of lumps
5. Before pouring the grout mix, ensure that the area is still damp. Apply the mixture straight away by carefully forcing Flowpoint into the joints using a neoprene squeegee. Flowpoint can set within as little as 15 minutes (at temperatures of 20^oC) so it's important to be quick but not hasty
6. Move the Flowpoint grout across the surface of the patio to top-up joints where the mortar has sunk
7. Use the neoprene squeegee to remove as much of the paving grout from the surface of the slabs – still keep the surfaces constantly damp to prevent the grout from getting to hard
8. Use a brush and plenty of water (or alternatively a sponge machine) to remove any grout that has hardened on the paving surfaces
9. Once the mortar is dry (after about 30 minutes - depending on temperature), clean the surface of paving slabs thoroughly to remove any spots of mortar and prevent staining, you'll be looking for clean water running of the patio
10. The pavers are ready to walk on after one hour and can receive car traffic after four hours