Get Orders By Thu 2nd. Jan - Mon 6th. JanUltraScape SlipBond Flexible Vertical Stone & Brick Slip Adhesive
UltraScape slipbond is a flexible cladding adhesive for both internal and external use. Slipbond consists of blended cements, graded fillers and additives and a high level of redispersible powder polymer. This flexible cladding adhesive is specially formulated with extended workability, for fixing brick slips and natural stone to a range of substrates. Including sand/cement render, brick and block work – and can be used for wall and floor applications as well as with external and internal wall installation systems.
UltraScape slipbond is a fully pre-mixed dry-pack which only requires the addition of water on-site. It can be applied to a thickness of 3mm-20mm up to 1m2 at a time. Ideal for use with Ultrascape Flowpoint Grout or Cempoint Pointing Mortar.
- Ideal for use in all weathers
- Applied to a thickness of 3mm – 20mm
- Frost resistant
- Suitable for: brick slips and natural stone
- Can be used with external wall installation systems
- Extended workability
- Suitable for underfloor heating
- External / internal use
- 20kg paper bab
- Coverage – 5m2 at 3mm depth
- Pallet Offer 56 x 20Kg bags.
PREPARATION
The preparation of the surface to be treated is of the greatest importance. Care must be taken to remove all loose material, debris, laitance, grease, paint and efflorescence. The concrete / masonry/ substrate should be thoroughly dampened with water. Any surplus water should be removed prior to commencing application.
MIXING
UltraScape slipbond should be added slowly to 5.2 litres of clean water per 20kg bag and mixed thoroughly, ideally with a forced action mixer for 3 minutes to give a slump free easily worked adhesive. Once mixed the mortar is immediately ready for use and has a pot life of approximately 2 hours at 20°C. Mix only sufficient material to be used within the pot life, do not remix or re-wet.
APPLICATION
Use a trowel to apply a layer of mortar on to the substrate with sufficient force to ensure a good bond. On large format stone it is advisable to back butter the stone unit prior to embedment. Once application of the mortar bed has taken place please ensure that the stone is applied within 25 minutes.
Reviews
There are no reviews yet.