Clean-It Heavy Duty Cleaner

Clean-It Heavy duty Cleaning solution is a high alkaline cleaner, that’s ideal to clean and remove heavy built-up dirt, grease and grime in even the most extreme cases, or renovate very old and tired floors. Perfect for use on porcelain, ceramics, cement, slate, quarry tiles, and unpolished stone.

• Deep cleans both tiles and grout lines
• Removes stubborn and difficult stains – such as drink spills, food, and grease
• Extremely powerful cleaner, super fast-acting
• Removes Flowpoint and Fuga-Pave Grout Haze
• Ideal for restoring old tiles and floors
• Deep cleans where other products have no effect
• Perfect for use on porcelain, ceramics, cement, slate, quarry tiles, & unpolished stone
• 100% biodegradable
• Always pre-test a small area

Coverage: Dilution rates per 1 litre

• Deep cleaning and degreasing – 1:5 -15m²
• Tile and grout refresh – 1:10 – 30m²

How to use

1. Depending on the level of soiling, dilute to the correct dilution rates with either hot or cold clean water.
2. Sweep or use a vacuum on the area to remove loose soils and debris.
3. Apply the cleaner to the surface and leave to act for 3 minutes, do not allow the product to dry into the surface.
4. Agitate the product into the surface using hard bristle or deck brush.
5. Once the desired result is achieved, extract all soils with clean water using a mop and bucket, and use cloths to remove any leftover residue.
6. Repeat the process on extremely dirty surfaces.
7. Rinse well with fresh clean water to ensure all residue is removed and again use a wet & dry vacuum, sponges, or cloths. Use with 1 cap of Clean-It PH neutral cleaning solution, to 5ltr of fresh clean water – this will dry streak-free, no need to rinse.
8. Failure to follow the guidelines may result in damage to the surface depending on the level of soiling.