Remove-It Extreme Residue Remover

Remove-IT Extreme Residue Remover has been specifically designed to be used on porcelain tiles and natural stone to help clean extremely stubborn stains.  Remove-IT Extreme Residue Remover is a safe, non-acidic, easy-to-use cleaning powder. It will help remove built-up dirt and traffic wear, and stubborn marks and build-ups to produce an even clean matt finish.

• Removes built-up dirt and traffic wear
• Removes stubborn marks and build-ups
• Produces an even clean matt finish
• Warning: Do not use on polished surfaces. 

How to use Remove-IT Extreme Residue Remover

1. The surface of tiles or paving must be free of all surface sealers and coatings.
2. Sweep, vacuum, or wipe the surface.
3. Sprinkle a liberal amount of Remove-IT Extreme Residue Remover onto the surface in a manageable area.
4. Add clean water to create a firm slurry mix.
5. Use a stiff brush and scourer and then start the cleaning process.
6. Do not allow the product to dry – add water to the slurry as required to keep damp.
7. Continue until the area is clear of dirt and grime.
8. Tip: Use a squeegee to wipe a little of the Remove-IT Extreme Residue Remover slurry off the tile to see how clean the area is, then continue cleaning
9. Remove the slurry and rinse thoroughly with clean water and a mop or scrubber drier.
10. Repeat the process as necessary.

Limitations

Do not mix with chemicals other than TT Paving Solutions products or allow the product to come into contact with any non-recommended surfaces.

Coverage

The coverage will vary depending on the surface type (rough or smooth tiles) and the severity of the staining.

Please Note: not for use on polished surfaces. Due to the nature of different surfaces, you should do several test areas in inconspicuous areas according to the label instructions to determine surface colour stability and desired results. The end-user must determine the suitability of the product for their intended use. This will take the shine off marble, limestone, and polished surfaces.