Weight	Price	Volume
0-13KG	£9.00+VAT	1 Small Bag / Tub
13.01-25KG	£10.00+VAT	1 Large Bag / Tub
25.01-50KG	£19.00+VAT	2 x Bags / Tubs
50.01-75KG	£28.00+VAT	3 x Bags / Tubs
75.01-100KG	£36.00+VAT	4-5 Bags /Tubs
100.01-249 KG	£42.50+VAT	5-9 Bags / Tubs
249.01-750KG	£47.50+VAT	10 Bags Plus
750.01KG +	£50.00+VAT	30 Bags Plus
Full Pallets FOC*	£0.00	52 Tubs / 56 Bags

Premium Next Day Service	+avg. £15 Click here for prices
Scotland Delivery Service	Click here for prices
Local Delivery & Click & Collect:	☎️ 0330 122 1025

Lithofin KF Stain-Stop: For Ceramic and Porcelain Tiles

Lithofin KF Stain Stop is a special product from the Lithofin range that has been specifically formulated for ceramics, quarry tiles and porcelain. This ready-to-use special impregnator is solvent based and contains high quality water and oil resistant components.

Lithofin KF Stain-Stop penetrates deeply into the surface of the worktop, slabs or tiles and coats the capillaries with an extremely thin, invisible film. Oil, grease and water are not absorbed into the surface, remaining on the surface of the materials, which means that any dirt or residues can easily be removed without leaving stains.

The effectiveness of Lithofin KF Stain Stop impregnator depends on the amount of product absorbed by the surface. The appearance of the surface material such as your tiles or slabs are either not or only slightly altered in colour.

Lithofin KF Stain Stop is primarily used for protecting unglazed ceramics against stains and for keeping up with every-day maintenance. Lithofin KF Stain Stop is highly recommended for use in kitchens, bathrooms and other areas which may come into contact with water and oil.

Please Note: Lithofin KF Stain-Stop does not or only slightly affect the slip resistance properties of the surface.

Lithofin KF Stain-Stop can be used on:

Unglazed Ceramics
Quarry Tiles
Porcelain
Terracotta

Lithofin KF Stain-Stop Technical Information:

Application Temperature: Use between 5°C and 25°C.
Switch off under floor heating.
Drying Time: most solvents will evaporate within two hours. The product will be fully effective after approx. 48 hours.
Coverage: depends on the absorbency of the material.
Estimates: approximately 40 sqm per 1 Litre bottle
Durability: up to 5 years in outdoor areas. Indoors, the durability depends on the care products used.
For regular maintenance, we recommend Lithofin KF Easy-Care.
Storage: Keep closed, cool and dry.
Shelf life of up to 3 years.
Open containers should be used quickly.
Appearance: liquid, colourless, clear
This item is perishable and therefore non-returnable

Please note: Test Lithofin KF Stain Stop on a small area of the surfaces prior to use.

Read more about how to prevent staining and efflorescence on paving in our blog.

Lithofin KF Stain Stop Technical information:

Packaging	1 L bottle. (5 Litre available on request)
Coverage	Coverage approx. up to 40m² per litre, depending on the absorbency of the surface.
Storage	Keep closed, cool & dry. Do not store in temperatures above 25°C
Shelf life	Up to 3 years

How to apply Lithofin KF Stain Stop: Directions for Use

The surface to be treated must be completely dry and clean. Where no prior experience exists or in cases of doubt, try the product in an inconspicuous area prior to use. Areas should be treated in sections of approx. 10 to 15m². On highly absorbent surfaces generously and evenly apply Lithofin KF Stain-Stop with a brush or lambs wool roller. On less absorbent surfaces use a brush or a clean cloth. After approximately 20 minutes, apply Lithofin KF Stain-Stop again to ensure that the entire surface is completely saturated. Then carefully remove all surface residues with a cloth. On large areas use a squeegee and a polishing machine with a white pad. Do not allow any product to dry on the surface. On highly absorbent surfaces, a second application after approx. 24 hours may be necessary. Please note: The liquid product must fully sink into the surface. Do not allow the product to dry on the surface, as dry residue will not be removable after 6 hours. Always try the product in an inconspicuous area prior to use. Lithofin KF Stain-Stop can only be used on absorbent and completely dry surfaces. Glass, ceramics, wood, and other surfaces sensitive to solvents must be protected against splashes.