Tile Rite Cyclone Paver Diamond Disc: 300mm Blade x 20mm Bore (Ideal for Porcelain; fits 300mm Stihl Saw)

The Tile Rite Cyclone Paver Diamond Disc is a 300mm Blade x 20mm Bore, wet & dry blade that is ideal for porcelain, ceramics & hard stone such as granite, limestone & marble. Ideal for use with a 300mm Stihl saw, the unique diamond mesh design on the 300MM Paver Diamond Disc helps cooling & increases the cutting speed. The 10mm tall rim pattern on the Cyclone Paver Diamond Disc brings dust out of the paving slab or tile to create a clean, high quality cut. The Cyclone Paver Diamond Disc has a much longer life than many similar blades on the market!

• The ideal blade for cutting external porcelain tiles and paving slabs
• 300mm Cyclone Rim wet & dry blade suitable for 300mm Stihl Saws
• Unique diamond mesh design, helps cooling & increases cutting speed
• 10mm tall rim pattern brings out dust to create clean, high quality cuts
• Longer life Disc
• Blade Diameter 300mm
• Central Bore: 20mm
• Reinforced Core ensures straight cuts at higher speeds
• Cooling holes for heat reduction to ensure stability of centre plate whilst cutting hard materials
• Perfect for Porcelain, Ceramics & Hard Stone
• Minimises chipping during cutting
• Can be used wet and dry

Tile Rite Cyclone Paver Diamond Disc with a 300mm Blade x 20mm Bore, is ideal for:

• Porcelain
• Ceramic 
• Hard Stone – such as granite, limestone, marble

Tile Rite Cyclone Paver Diamond Disc with a 300mm Blade x 20mm Bore Technical Information:

• Blade Diameter: 300MM
• Bore Size: 20MM
• Thickness: 2MM
• Max RPM: 6400
• Max Cut Depth: 20MM in one pass (40MM in two passes)
• Blade Type: Cyclone Rim for Wet & Dry Cutting
• TileType: Porcelain, Ceramics & Hard Stone
• Weight: 1.36KG
• Barcode: 5019788003009

How to install the Tile Rite Cyclone Paver Diamond Disc with a 300mm Blade x 20mm Bore onto a 300mm Stihl Saw?

Diamond cutting discs are a crucial tool for grinding, accurately cutting and polishing paving slabs and tiles. So, just how do we set up the Stihl Saw with a diamond disc?

1. Before fitting your new disc, make sure that the saw is at a complete stop and that the motor isn’t running
2. Insert the locking pin into the hole in the drive belt cover, then turn the cutting disc until the pin engages 
3. Use a wrench to release the clamping screw
4. Then carefully remove the clamping flange and cutting disc if there is one 
5. Place the new Tile Rite Cyclone Paver Diamond Disc on the centring collar of the clamping flange 
6. Ensure that you tighten the cutting disc clamping screw using the wrench and turning clockwise to a torque of 25Nm
7. Top up the Stihl Saw with two-stroke fuel mixture whilst the saw is safely on the ground 
8. Press the fuel pump button until the button is filled with fuel 
9. Then press both triggers and move the start/stop switch to the starting position 
10. If the motor is cold, pull the choke lever upwards 
11. If the motor is hot, pull the choke lever up and then push it back down
12. Ensure that the Stihl Saw is held firmly on an even floor and hold the forward grip securely with the left hand 
13. Pull the starter handle, when the motor fires; move the choke lever back to its original position

Want to read our guide on ‘how to cut porcelain tiles without chipping them’, please click here: 

For further information on our range of blades, call our team on ☎️ 0330 122 1025