UltraScape Flowpoint Smooth Rapid Set External Paving Grout

UltraScape Flowpoint Smooth is a flowable patio & paving grout which is ideal for porcelain, and filling joints from just 3mm between all types of paving slabs & setts. It’s perfect for use on granite setts, sandstone, limestone, Indian Stone, Yorkstone and concrete slabs – and particularly porcelain where a finer aggregate finish is required. The patio pointing mix comes in a handy 25kg bag so it’s not too heavy to lift, it’s really simple to mix with water and a large bucket, is fast to apply and is fast to set.

As Flowpoint Smooth is rapid setting it means that your patio is pointed far quicker than using traditional methods of pointing and jointing slabs. The grout is simply mixed and poured over the paving slabs, then worked into the joints with a squeegee, it’s then washed off after an initial 15 minute setting time to produce robust joints which stop weeds growing back! 

For peace of mind, Ultrascape Flowpoint exceeds all the requirements of the latest British Standard BS 7533. Flowpoint has been widely used over the last 20 years for a variety of projects including public realm, landscaping, streetscape projects and many non-commercial domestic patios and gardens. UltraScape Flowpoint is known and loved because it’s fast to apply, cost effective and produces solid robust joints – it is manufactured to last up to 40 years! 

What is Flowpoint grout?

UltraScape Flowpoint is a rapid-setting flowable grout that is applied as a wet slurry to quickly point patios, paved areas, terraces and paths, even in light rain. Ideal for both domestic and commercial paving projects, Flowpoint can be used with all types of manufactured and natural stone – including sandstone, porcelain, limestone, Indian stone, slate, clay, concrete and granite setts. Flowpoint is an award-winning grout favoured by major contractors that is available in Standard grade, Smooth, ECO with 20% recycled glass and FINE for porcelain. Flowpoint is one of the fastest setting grouts on the market, and lasts anything up to 40 years. Supplied in either 25KG bags, or Fine which comes in a 20KG tub, Flowpoint drys in just 30 minutes and provides a seamless surface with your smooth or riven paving slabs.

What is Flowpoint Smooth used for?

UltraScape Flowpoint Smooth is a fast set flowable, paving grout for grouting patios and paved areas, particularly for porcelain & all types natural stone that need a finer joint, Flowpoint Smooth can accommodate joints from just 3mm. Flowpoint Smooth is ideal for paved areas which are rigid or bound, and where a void-free joint is needed. This rapid set paving grout can be used with all types of natural stone, concrete flags and clay pavers.

Use with the UltraScape BS 7533 Mortar Paving System, a range of high performance materials that meet and exceed the strict demands of BS 7533. Including a rapid strength fine bedding concrete – EcoBed, priming slurry – Pro-Prime and flowable jointing grout Flowpoint.

If you’d like to learn a little more about UltraScape Flowpoint, the grades and colours it is available in and why it’s the UK’s favourite slurry paving grout, read our recent blog post ‘What is Flowpoint’ here, or check out our Frequently asked questions here! For any other questions don’t hesitate to call – ☎️ 0330 122 1025