Nexus ProJoint Eliminator – Grout Haze, Cement Residue, Efflorescence and Salt Remover

Nexus ProJoint Eliminator is an environmentally friendly, non-toxic paving slab and tile cleaner that removes cement residue, grout haze, efflorescence and salts, from unpolished natural stone paving, porcelain and sensitive stone. Eliminator has been manufactured to be used internally and externally, on walls and floors, and has acid replacement technology which does not contain any brick acid.

Available in a handy 5 litre bottle, ProJoint Eliminator is DIY friendly and does not damage surrounding materials or the paving slabs, tiles or setts. Eliminator is fast and easy to use, and removes cement deposits within minutes.

Please note: Nexus ProJoint Eliminator is not suitable for use in or around fish ponds or aquariums. 

Nexus ProJoint Eliminator Technical Information:

• Available in a large 5 litre bottle
• High strength cleaning concentrate
• Coverage:
  • Light Deposits: 25m2
  • Heavy Deposits: 15m2
  • Undiluted: 5m2
• Dilute 1 part cleaner to 4 parts cold, clean water – Light deposits
• Dilute 1 part cleaner to 1 parts cold, clean water – Heavy deposits
• Can be applied undiluted for stubborn stains
• Long lasting protection
• Suitable for both interior & exterior use
• Please note: This is not suitable for use in or around fish ponds or aquariums, not suitable for polished surfaces

How to apply Nexus ProJoint Eliminator:

• Light Soiling: Dilute one-part Nexus Projoint Eliminator to four-parts cold, clean water. Apply onto the paving slabs, tiles or flags with a cloth or sponge. Leave for up to a maximum 30 minutes to penetrate, remove any cement residue using a large clean sponge and plenty of water.
• Heavy Soiling: Dilute one-part Nexus Projoint Eliminator to one-part cold, clean water. Apply liberally onto the paving slabs, tiles or flags with a cloth or sponge. Agitate with a scrubbing brush, or rotary scrubbing machine. Leave to penetrate for 5-10 minutes, keeping the surface wet by applying more Eliminator, then when dirt/debris has loosened, remove any cement residue using a large clean sponge and plenty of water.
• Extreme Soiling: For severe cases, pre-wet the paving slabs or tiles with cold, clean water and liberally apply Projoint Eliminator undiluted to the surface. Agitate with a scrubbing brush, nylon pad or mechanical scrubber, and immediately remove the soil, dirt and debris with a clean sponge and rinse thoroughly with clean water.
• Ensure the ProJoint Eliminator is not allowed to dry on treated surfaces, adding additional product or clean water to the surface to keep wet
• Do not use ProJoint Eliminator around fish ponds or aquariums
• Do not allow the cleaner to run off to enter any drains or watercourses
• Always dilute ProJoint Eliminator, adding eliminator to water, not the other way round!
• ProJoint Eliminator is not recommended to be used on polished surfaces (for eg. polished marble, travertine or limestone) or when under floor heating is turned on
• Always test ProJoint Eliminator on a small, sample patch of your tile or paving slab prior to use
• Wash tools, hands and exposed skin thoroughly after use

For more information on the Nexus range of products please give us a call ☎️ 0330 122 1025.