Ultracrete Flowcon: Self-Compacting Concrete 25KG (56x 25Kg Bags). Free Delivery 🚚
If you are looking for a great trade deal on a high specification, flowable C40 concrete, that comes in a contractor friendly 25KG bag, that’s perfect for small sites with limited access, look no further!
Ultracrete Flowcon is a general-purpose, flowable, self-compacting concrete, which has been pre-blended and is ideal for most multi-purpose concreting applications such as patching, post erection, footings, foundations, bedding septic tanks & agricultural yards.
Flowcon gives a quality mix without the waste and inconsistency of site mixed materials, and is perfect for repairs where there is limited site access and where it is not possible to deliver bulk concrete.
The trade deal is for a pallet of 56 x 25KG bags, perfect for large scale projects that just don’t have room for a silo or bulk delivered concrete.
If you need a copy of the technical datasheet or safety information then please do give us a call on ☎️ 0330 122 1025.
Technical information
Flowcon is supplied in 25kg polythene bags and is manufactured from selected cements, sands, aggregates and chemical admixtures, it boasts a high compressive strength of 55N/mm².
The product requires only the addition of water and can be applied to depths of 20mm-200mm in one pass.
Flowcon should not be used at temperatures below 5°C during application or initial set.
- Workability: 60 minutes
- Set time: 6 hours
- Depth: 20mm – 200mm
- Pre-blended cement for a consistent quality mix
- Size: 25kg plastic bag
- Pallet Offer: 56 x 25kg bags
How to mix and apply Flowcon
Each bag of Flowcon contains aggregate as well as a small pack of specialist cements.
- Add the entire contents of the pack and the aggregate to a standard free fall mixer.
- If the material is to be mixed by hand, empty contents onto a clean board and mix without adding the water for a short time to combine the cement and the aggregate.
- Because the aggregates contain moisture, water should be added gradually untill the required consistency is achieved. Typically 1.5-3 litres of clean water should be sufficient for a 25kg bag of product to achieve the desired consistency. Note: It is essential that this product not be over-watered.
- The mixed material should be applied as soon as possible after mixing.
- Tamp or finish as necessary avoiding excessive vibration as segregation of aggregate may occur.
Get Orders By Wed 27th. Nov - Fri 29th. Nov
Reviews
There are no reviews yet.