UltraScape Flowpoint Premium Smooth Paving Grout – Limestone

UltraScape Flowpoint Premium Smooth Paving Grout in Limestone is a rapid set, slurry grout that is ideal for jointing all types of paving slabs and setts from just 3mm. It’s perfect for use with granite setts, sandstone, limestone, Indian Stone, Yorkstone, clay, concrete slabs – and particularly porcelain where a finer aggregate finish is required. Flowpoint Premium Smooth can fill joints from 3mm – 50mm wide, with a minimum depth of 20mm, up to 200mm in one application!

Flowpoint Premium Smooth comes in two new colours to the Flowpoint range; Stone Grey & Limestone. Available in a handy showerproof 25KG bag, simple to mix, you just add 4.25 litres of clean water to a bucket, add the powder, and mix for between three to five minutes until a smooth lump-free consistency has been achieved. Flowpoint Premium Smooth will reach its initial set in just thirty minutes, and will accept light foot traffic after one hour, and vehicular traffic after four hours. 

To apply Flowpoint Premium Smooth Paving Grout, paving slabs should be free from debris & ponded water. The paving surface & joints should be pre-soaked & kept lightly damp with a consistent light spray of water, until the jointing process has been completed. The grout is then simply poured over the paving slabs, carefully pushed into the joints with a neoprene squeegee, then washed off once it has hardened sufficiently. 

For peace of mind, Ultrascape Flowpoint Premium exceeds all the requirements of the latest British Standard BS 7533. Flowpoint has been widely used over the last 20 years for a variety of projects including public realm, landscaping, streetscape projects and many non-commercial domestic patios and gardens. UltraScape Flowpoint is known and loved because it’s fast to apply, cost effective and produces solid robust joints – it is manufactured to last up to 40 years! 

Use Flowpoint Premium Smooth Paving Grout with: 

• Granite setts (usage around 1 bag per 1.5 Square Mtrs on average needed) 
• Sandstone
• Limestone (not dark limestone) 
• Porcelain
• Indian Stone
• Yorkstone
• Clay
• Concrete slabs

Flowpoint Premium Smooth Technical Information

• Rapid setting smooth slurry paving grout
• Available in Limestone & Stone Grey
• Joint width: 3-50mm Depth: 20-200mm
• For use with granite setts, sandstone, limestone, porcelain, Indian Stone, Yorkstone, clay & concrete slabs (not suitable for use with darker limestone) 
• Open to foot traffic in 1 hour
• Open to vehicular traffic in 4 hours
• Rapid setting with exceptional bond strength
• Initial set after 15-30 minutes at 20°C
• Shrinkage compensated
• Mixes quickly on-site with water in a bucket – one bag at a time
• Cool temperatures retard, warm temperatures accelerate (do not use in direct sunlight as product will go off rapidly).
• Economical to use
• Conforms to British Standard – BS 7533
• Ideal for large scale projects
• Mix and use one bag at a time
• 25kg paper bags
• Please note: Flowpoint Premium Smooth is not recommended for use with some darker limestone, such as black limestone, as it can lead to a slight oxidisation. Call our expert team if you would like further advice on the ideal grout for darker limestone.
• Shelf life from date of manufacture printed on the bag, unopened in the above conditions, for sealed bags is 8 months. Please note: the use of this product after the end of the declared storage period may increase the risk of an allergic reaction.

What is Flowpoint Premium Smooth Paving Grout Limestone?

UltraScape Flowpoint Premium Smooth Paving Grout is a rapid-setting flowable grout that is applied as a wet slurry to quickly point patios, paved areas, terraces and paths, even in light rain. Flowpoint Premium Smooth can fill joints from 3mm – 50mm wide, with a minimum depth of 20mm, up to 200mm in one application! Ideal for both domestic and commercial paving projects, Flowpoint Premium Smooth can be used with all types of manufactured and natural stone – including sandstone, porcelain, limestone, Indian stone, slate, clay, concrete and granite setts. Flowpoint is one of the fastest setting grouts on the market, and lasts anything up to 40 years. Supplied in a showerproof 25KG bag, Flowpoint drys in just 30 minutes and provides a seamless surface with your smooth or riven paving slabs.

What colour is Ultrascape Flowpoint Premium Smooth Paving Grout available in?

UltraScape Flowpoint Premium Smooth Paving Grout is available in both Limestone and Stone Grey. This listing is for Limestone, for Stone Grey Click Here: 

How do I use Flowpoint Premium Smooth Paving Grout?

This handy reel on Facebook will show you how to lay Flowpoint, and give you some handy hints and tips. Click here for a video on how to lay Flowpoint Premium Paving Grout.

What is Flowpoint Premium Smooth Paving Grout used for?

UltraScape Flowpoint Premium Smooth is a fast set flowable, paving grout for grouting patios and paved areas, particularly for porcelain & all types natural stone that need a finer joint, Flowpoint Premium Smooth can accommodate joints from just 3mm. Flowpoint Premium Smooth is ideal for paved areas which are rigid or bound, and where a void-free joint is needed. This rapid set paving grout can be used with all types of natural stone, concrete flags and clay pavers.

Use with the UltraScape BS 7533 Mortar Paving System, a range of high performance materials that meet and exceed the strict demands of BS 7533. Including a rapid strength fine bedding concrete – EcoBed, priming slurry – Pro-Prime and flowable jointing grout Flowpoint.

If you’d like to learn a little more about UltraScape Flowpoint Premium Smooth, the grades and colours it is available in and why it’s the UK’s favourite slurry paving grout, read our recent blog post ‘What is Flowpoint’ here, or check out our Frequently asked questions here! For any other questions don’t hesitate to call – ☎️ 0330 122 1025 or 01827 794 350

How many bags of Flowpoint Premium Smooth Paving Grout do I need?

The number of bags of Flowpoint Premium Smooth Limestone needed to joint between paving slabs, tiles or setts depends on the area in square metres that you have to pave, the width and length of your slabs, and the width and depth of your joints. Under the image above, you will find a handy calculator to help you work this out. But, as a general rule of thumb, for larger format porcelain tiles say 600mm x 900mm; with a joint width of 5mm and depth of 20mm you’ll use one bag of Flowpoint per 30m2, for a mixed pack of sandstone slabs you’ll use one bag on average for every 20m2, and for granite setts that are much smaller in area and have a need for a deeper joint you’ll use on average one bag per 1.5-2m2.

For an accurate calculation, using your exact slab dimensions and patio area, please refer to our calculator or give us a call on ☎️ 0330 122 1025. 

What is the Shelf Life for Flowpoint Premium Smooth?

Shelf life from date of manufacture printed on the bag, unopened in the above conditions, for sealed bags is 8 months. Please note: the use of this product after the end of the declared storage period may increase the risk of an allergic reaction.

Please note: Flowpoint Premium Smooth is not recommended for use with some darker limestone, such as black limestone, as it can lead to a slight oxidisation. Call our expert team if you would like further advice on the ideal grout for darker limestone. ☎️ 0330 122 1025.