Fast Delivery UK Mainland

Free Delivery on Full Pallets & Selected Lines

Collection by Appointment

0330 122 1025

(Open 8:30am – 5:30pm )
Standard local call rates apply

£0.00
0
Standard & Next Day Delivery Available

Huge Discounts On Bulk Orders | FREE Delivery on Full Pallets 🚚 | Call 0330 122 1025 For A Quote.

Huge Discounts On Bulk Orders – Call 0330 122 1025 For A Bespoke Quote.

Fast Delivery UK Mainland

Free Delivery on Full Pallets & Selected Lines

Collection by Appointment

Open Mon-Fri
8:30-5:30pm

£0.00
0
Search
Close this search box.
Next Day Delivery Available

How much will you need?

0 x 10kg Unit

UltraFloor DPM IT: Rapid Curing Primer Membrane 5Kg: Full Pallet 80 x 5KG Tubs

£4,800.00 Ex. VAT - £5,760.00 Inc. VAT

UltraFloor DPM IT is a two-part, solvent free, epoxy resin, damp proof membrane & bonding surface primer for industrial flooring applications. Resists sub-floor moisture. With a 45-75 minutes pot life, and a 5 hours cure time – DPM IT is ideal for internal floors. Available in 5kg Tub.

The deal is for UltraFloor DPM IT: Rapid Curing Primer Membrane 5Kg: Full Pallet 80 x 5KG Tubs

For further information or to ask our team any questions please call ☎️ 0330 122 1025

In stock

Get Orders By Thu 5th. Dec - Mon 9th. Dec Estimated delivery date, click here for info
Next Day Delivery available at checkout
Please see our FAQ’s for more information.

Delivery & Returns Info

Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.

Weight Price Volume
0-13KG£9.00+VAT1 Small Bag / Tub
13.01-25KG £10.00+VAT1 Large Bag / Tub
25.01-50KG £19.00+VAT 2 x Bags / Tubs
50.01-75KG£28.00+VAT 3 x Bags / Tubs
75.01-100KG£36.00+VAT4-5 Bags /Tubs
100.01-249 KG£42.50+VAT 5-9 Bags / Tubs
249.01-750KG£47.50+VAT10 Bags Plus
750.01KG + £50.00+VAT 30 Bags Plus
Full Pallets FOC* £0.0052 Tubs / 56 Bags
Premium Next Day Service+avg. £15 Click here for prices
Scotland Delivery Service Click here for prices
Local Delivery & Click & Collect: ☎️ 0330 122 1025

*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £80 on a Next Day Service)

Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.

For any advice; technical, product, stock or quantity needed, call our team on 0330 122 1025.

how much do i need?

Area

Slab Width

Slab Length

Joint Width

Joint Depth

amount:

UltraFloor DPM IT: Rapid Curing Primer Membrane 5Kg: Full Pallet 80 x 5KG Tubs

UltraFloor’s Rapid Curing Primer Membrane is a two component, solvent free epoxy resin system for use as a surface damp proof membrane and as a screed bonding aid (primer) for industrial flooring applications. DPM IT has been designed to provide protection against subfloor moisture and as a primer for bonded screed installations. DPM IT activates via a reaction between the resin and hardener components, to give a durable continuous membrane. When mixed the product is black in colour enabling easy identification of applied areas.

UltraFloor DPM IT is suitable for use as a DPM to suppress residual moisture in concrete and sand/cement screeds where the moisture levels are 98% RH or less, when tested with a properly calibrated surface hygrometer in accordance with BS 8203. As a two-coat application it may be used on subfloors where there is an absence of a constructional base DPM, provided there is no hydrostatic pressure. In some circumstances it may be used over cementitious screeds incorporating warm water underfloor heating systems. It is also ideal for use as a primer/screed bonding agent for installations of polymer modified and proprietary cementitious screeds.

Please note: UltraFloor DPM IT should not be used in projects where hydrostatic pressure is a concern. In such cases the use of pressure relief drainage and/or external tanking systems must be the primary method of protection against moisture.

The deal is for UltraFloor DPM IT: Rapid Curing Primer Membrane 5Kg: Full Pallet 80 x 5KG Tubs

UltraFloor DPM IT: Technical Information:

  • Surface DPM
  • Two-part epoxy resin system
  • Primer for bonded screed applications
  • Fast cure system
  • Dual chamber packaging
  • 98%RH floor moisture tolerance
  • 45-75 minutes pot life
  • 5 hours cure time
  • Specification BS EN 13813:2002
  • DPM Classification SR-> B2, 0 at 7d
  • Working time at 20°C 45-75 minutes pot life
  • Internal floors
  • Walk on hardness time at 20°C 5 hours
  • Available in 5kg
  • Full Pallet 80 x 5KG Tubs

How do I mix and apply UltraFloor DPM IT?

  1. Pierce the centre of the lid on the top chamber and push through to pierce the centre of the base also.
  2. Allow the material (hardener) to fully drain from the top container into the base. This will normally take between 3 and 5 minutes.
  3. Replace lid on the top chamber and remove the top chamber from the twin pack.
  4. Using a power whisk at slow speed, gradually mix the two components (resin + hardener) together. Keep the whisk below the surface to avoid entrapping air.
  5. Continue mixing for between 3 and 5 minutes until a totally uniform consistent colour product is attained. DO NOT OVERMIX as this can generate heat.
  6. If required use a flat implement to scrape materials from the side of the container to ensure they are fully mixed.
  7. UltraFloor DPM IT has a pot life of up to 60 minutes but for best flow characteristics it is recommended to apply as soon as mixing has been completed.
  8. Apply UltraFloor DPM IT to the substrate by pouring it onto the floor area to be treated. Always begin at the far point of the floor to ensure you do not need to walk over it after application.
  9. For use as a DPM the product should be spread using a suitable notched trowel to determine the correct coverage rate. Over roll the serrations using a short pile roller pre-wetted in UltraFloor DPM IT to ensure a uniform coating is achieved. This should be done immediately following trowelling.

Technical information

It is suitable for use as a DPM to suppress residual moisture in concrete and sand/cement screeds where the moisture levels are 98% RH or less, when tested with a properly calibrated surface hygrometer in accordance with BS 8203. As a two-coat application it may be used on subfloors where there is an absence of a constructional base DPM, provided there is no hydrostatic pressure. In some circumstances it may be used over cementitious screeds incorporating warm water underfloor heating systems. It is also ideal for use as a primer/screed bonding agent for installations of polymer modified and proprietary cementitious screeds. NOTE: UltraFloor DPM IT should not be used in projects where hydrostatic pressure is a concern. In such cases the use of pressure relief drainage and/or external tanking systems must be the primary method of protection against moisture. Air temperature should be a minimum of 10oC throughout application and curing. Floor temperature should be a minimum of 3oC above the dew point to ensure there is no moisture present at the subfloor surface which will hinder adhesion. Dew point is linked to atmospheric humidity and temperature. Most modern electronic moisture testing kits provide this function. The product should be stored at temperatures between 10oC and 25oC overnight, prior to use. This ensures that the product will be at a suitable viscosity for mixing and will have optimum pot life.

How to mix and apply DPM IT

  1. Pierce the centre of the lid on the top chamber and push through to pierce the centre of the base also.
  2. Allow the material (hardener) to fully drain from the top container into the base. This will normally take between 3 and 5 minutes.
  3. Replace lid on the top chamber and remove the top chamber from the twin pack.
  4. Using a power whisk at slow speed, gradually mix the two components (resin + hardener) together. Keep the whisk below the surface to avoid entrapping air.
  5. Continue mixing for between 3 and 5 minutes until a totally uniform consistent colour product is attained. DO NOT OVERMIX as this can generate heat.
  6. If required use a flat implement to scrape materials from the side of the container to ensure they are fully mixed.
  7. UltraFloor DPM IT has a pot life of up to 60 minutes but for best flow characteristics it is recommended to apply as soon as mixing has been completed.
  8. Apply UltraFloor DPM IT to the substrate by pouring it onto the floor area to be treated. Always begin at the far point of the floor to ensure you do not need to walk over it after application.
  9. For use as a DPM the product should be spread using a suitable notched trowel to determine the correct coverage rate. Over roll the serrations using a short pile roller pre-wetted in UltraFloor DPM IT to ensure a uniform coating is achieved. This should be done immediately following trowelling.

Reviews

There are no reviews yet.

Be the first to review “UltraFloor DPM IT: Rapid Curing Primer Membrane 5Kg: Full Pallet 80 x 5KG Tubs”

Your email address will not be published. Required fields are marked *

You may also need..

Customers also bought..