Get Orders By Mon 7th. Apr - Thu 10th. AprUltraTileFix ProPrimer
For an exceptional bond to multiple types of floor and wall substrates, choose UltraTileFix ProPrimer. This polymer primer is designed for use on both porous and non-porous substrates.
UltraTileFix ProPrimer is ideal for use on concrete, sand & cement screed, plywood overlay (15mm minimum), tile backer boards, cement-faced fibre boards, anhydrite screeds, tile on tile, plaster, plasterboard, sand & cement render, concrete brick/block, hard vinyl tiles, and flooring grade asphalt.
Coverage of a 5-litre bottle of ProPrimer
- 1:1 dilution covers 70-100m²
- 3:1 dilution covers 140-200m²
- When applied neat covers 25-50m²
Use on porous substrates
UltraTileFix ProPrimer should be diluted before use. For a 1st coat use 3 parts water to 1 part primer, for a 2nd coat use 1 part water to 1 part primer. On really absorbent subfloors you will almost certainly require a 3rd coat, if a 3rd coat is needed use this at 1 part water to 1 part primer. In good drying conditions, UltraTileFix ProPrimer should be ready for an additional coats after approximately 1-2 hours.
Use on non-porous substrates
On non-porous substrates use just 1 coat, completely neat.
Reviews
There are no reviews yet.