UltraFloor Level IT Renovate

Technical information

• Semi-rapid, fibre-reinforced, single-part smoothing underlayment
• Refurbishes existing floorings at a depth of 3-40mm
• Ideal for most stable and strong subfloorings (indoor)
• Ready to apply to floorings after 4 hours
• Walk on the coverings within as little as 2 to 2.5 hours
• UFH compatible
• Low odours
• Ideal for areas that are biologically sensitive (a protein-free formulation)
• Available in a 20kg, reinforced paper bag

Please note: if you are using UltraFloor Level IT Renovate with systems for underfloor heating, do take into consideration the depth of the product to help maintain heating efficiencies.

How to mix UltraFloor Level IT Renovate

• Mixing ratios of powder and water should be controlled to ensure a free flowing material suitable for 3-40mm application.
• Do not use excess water as this will affect the product performance and finish. F
• or trowel/hand application mix in a clean bucket using clean cold water, as warm water will greatly reduce the product’s working time and may result in shrinkage.
• Pour 4.5 litres of water into an oversized bucket (20+ litres), and then gradually add the powder whilst mixing continually with an electric drill with power whisk.
• When all powder is added mix for a further 2 minutes, keeping the whisk below the surface (to minimise air entrapment), until a lump free creamy material is attained.

How to apply UltraFloor Level IT Renovate

• Pour onto the floor and spread with a smooth edge steel trowel.
• UltraFloor Level IT Renovate has exceptional flow characteristics, a spiked roller may be used to further improve the finish particularly between adjacent units of product.
• Only spike roll whilst the product is still in its fluid state (immediately due to the limited workability and rapid setting nature).