Ultracrete M60 F: Rapid Strength, Fibre Reinforced Bedding Mortar
About the product
UltraCrete M60 F is a fibre reinforced, superior strength, rapid set bedding mortar for bonding granite setts and flags, bedding heavy kerbs, securing ironwork and access covers, and emergency repairs. Supplied pre-blended, in a 25KG bags it only requires the addition of water. The product can be used from 10mm-75mm in one pass, with greater depths possible using the layer-upon-layer method. Contractor friendly, M60 F achieves exceptional bond strength without the need of an additional primer. The product can be bulked out with the addition of up to 30% hard stone clean aggregate.
Save with a pallet deal – includes Free Delivery 
View M60F deal on 56x 25kg bags
Got a question about M60 F? Download the technical datasheet (pdf) or see our comprehensive FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. Or alternatively, call ☎️ 0330 122 1025 – we’re a small team, but happy to help. 😊✨
Calculate required quantity
Ultracrete M60 F: Rapid Strength, Fibre Reinforced Bedding Mortar
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
How much you will need?
Technical information
- M60 F is supplied pre-blended in 25kg reinforced paper bags and requires only the addition of water.
- The product can be used from 10mm-75mm in one pass. Greater depths are possible using the layer-upon-layer method.
- Achieves exceptional bond strength without the use of an additional primer.
- Can be bulked out with the addition of up to 30% hard stone clean aggregate. Please note that this will reduce the product’s strength gain and alter its performance characteristics (we always recommend a patch test if additional aggregate is added).
- Download the technical datasheet (pdf)
How to prepare surfaces for M60 F bedding mortar
- All surfaces should be free from oil, grease, dust or any other visible contaminants.
- Remove all loose particles and work on a sound substrate.
- Pre-soak the area with clean water prior to application to aid bond.
- Remove ponded water before applying the product.
How to mix M60 F
- Mix with a forced action mixer or by hand with an appropriate tool.
- If hand mixing is used, ensure that it is vigorous.
- 25kg of product will require approximately 3 litres of water.
- A stiff consistent mix with no slump should be achieved, ensuring all particles are well wetted.
- Mix only enough material to apply within 4 minutes.
- Never remix or add extra water.
How to apply M60 F bedding mortar
- Apply the bedding material over a pre-soaked area.
- Once mixed, M60 F should be applied to the supporting structure within 4 minutes.
- Firm well into position using a float and allowing a 5mm excess thickness.
- Place the frame onto the bedding mortar ensuring it is fully supported. Check that the frame does not overhang the mortar at any point (use suitable lifting equipment when positioning the frame). Care must be taken to prevent voids in the bedding material under the frame, especially in the cover seating area.
- The frame should then be tamped into place ensuring the correct level is obtained.
- Any holes within the frame should be in- filled and the flanges of the frame enveloped by a minimum thickness of 10mm of the bedding material.
- Exposed surfaces of the bedding material should be float finished, ensuring voids are filled.
- Remove loose materials and point the inside surface to a smooth finish.
- Once the bedding material has reached its initial set, the backfill material UltraCrete QC10 F concrete can be placed.
About the product
UltraCrete M60 F is a fibre reinforced, superior strength, rapid set bedding mortar for bonding granite setts and flags, bedding heavy kerbs, securing ironwork and access covers, and emergency repairs. Supplied pre-blended, in a 25KG bags it only requires the addition of water. The product can be used from 10mm-75mm in one pass, with greater depths possible using the layer-upon-layer method. Contractor friendly, M60 F achieves exceptional bond strength without the need of an additional primer. The product can be bulked out with the addition of up to 30% hard stone clean aggregate.
Save with a pallet deal – includes Free Delivery
View M60F deal on 56x 25kg bags
Got a question about M60 F? Download the technical datasheet (pdf) or see our comprehensive FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. Or alternatively, call ☎️ 0330 122 1025 – we’re a small team, but happy to help. 😊✨
Ultracrete M60 F: Fibre Reinforced Bedding Mortar
Ultracrete M60F is a market leading, fibre reinforced bedding mortar for superior strength gain, the addition of fibre to the mix improves the flexural and tensile strength. M60F is ideal for use with all access covers, as well as for the bonding of granite setts, flags and bedding kerbs. Use of this rapid strength gain mortar means that repairs can be open to traffic in just 60 minutes.
- Improved flexural and tensile strength
- Contains recycled material
- Rapid strength gain
- Fibre reinforced
- Compressive strength after 1 hour 25N/mm2 (31:50 N/mm2 after 2 hours)
- Enhanced performance
- Shrinkage compensated
- Open to traffic: 60 minutes
- Conforms to HD27/15
- Coverage:Approx 1 x 400mm x 400mm standard ironwork cover and frame @ 25mm, dependant on bed depth, brickwork and substrate
- Size: 25kg reinforced paper bag
- Download the technical datasheet (pdf)
Applications
UltraCrete M60 F is a fibre reinforced, superior strength bedding mortar for use with all access covers, as well as for the rapid bonding of granite setts and flags, emergency repairs and bedding of kerbs.
Technical
M60 F is supplied pre-blended in 25kg bags or plastic containers and requires only the addition of water. The product can be used from 10mm-75mm in one pass, with greater depths possible using the layer-upon-layer method.
M60 F achieves exceptional bond strength without the use of a primer. The product can be bulked out with the addition of up to 30% hard stone clean aggregate. Please note that this will reduce the product’s strength gain and alter its performance characteristics.
Preparation
All surfaces should be free from oil, grease, dust or any other visible contaminants. Remove all loose particles and work on a sound substrate. Pre-soak the area with clean water prior to application to aid bond. Remove ponded water before applying the product.
Mixing
M60 F can be mixed with a forced action mixer or by hand with an appropriate tool. If hand mixing is used, ensure that it is vigorous. 25kg of product will require approximately 3 litres of water. A stiff consistent mix with no slump should be achieved, ensuring all particles are well wetted.
Note: Mix only enough material to apply within 4 minutes. Never remix or add extra water.
Placing
Apply the bedding material over a pre-soaked area. Once mixed, M60 F should be applied to the supporting structure within 4 minutes. Firm well into position using a float and allowing a 5mm excess thickness. Place the frame onto the bedding mortar ensuring it is fully supported. Check that the frame does not overhang the mortar at any point (use suitable lifting equipment when positioning the frame).
Care must be taken to prevent voids in the bedding material under the frame, especially in the cover seating area. The frame should then be tamped into place ensuring the correct level is obtained. Any holes within the frame should be infilled and the flanges of the frame enveloped by a minimum thickness of 10mm of the bedding material. Exposed surfaces of the bedding material should be float finished, ensuring voids are filled. Remove loose materials and point the inside surface to a smooth finish. Once the bedding material has reached its initial set, the backfill material UltraCrete QC10 F concrete can be placed.
Cleaning
M60 F should be removed from tools and equipment with clean water immediately after use. Cured material can also be removed mechanically.
Storage
Store in closed original packaging at temperatures between 5°C and 30°C. Avoid frost.
Shelf life
Shelf life in correct conditions for sealed packaging is 8 months. High temperatures and high humidity will lead to a reduced shelf life.
Trade discounts
Save with a pallet deal – includes Free Delivery 
View M60F deal on 56x 25kg bags
- Brand: Instarmac
- SKU: TPE-ULTM60FBAG
- Weight: 25.0 kg / 55.12 lb
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
For any advice; technical, product, stock or quantity needed, call our team on 0330 122 1025.
Please see our FAQs for more information.
Ultracrete M60 F: Fibre Reinforced Bedding Mortar
Ultracrete M60F is a market leading, fibre reinforced bedding mortar for superior strength gain, the addition of fibre to the mix improves the flexural and tensile strength. M60F is ideal for use with all access covers, as well as for the bonding of granite setts, flags and bedding kerbs. Use of this rapid strength gain mortar means that repairs can be open to traffic in just 60 minutes.
- Improved flexural and tensile strength
- Contains recycled material
- Rapid strength gain
- Fibre reinforced
- Compressive strength after 1 hour 25N/mm2 (31:50 N/mm2 after 2 hours)
- Enhanced performance
- Shrinkage compensated
- Open to traffic: 60 minutes
- Conforms to HD27/15
- Coverage:Approx 1 x 400mm x 400mm standard ironwork cover and frame @ 25mm, dependant on bed depth, brickwork and substrate
- Size: 25kg reinforced paper bag
- Download the technical datasheet (pdf)
Applications
UltraCrete M60 F is a fibre reinforced, superior strength bedding mortar for use with all access covers, as well as for the rapid bonding of granite setts and flags, emergency repairs and bedding of kerbs.
Technical
M60 F is supplied pre-blended in 25kg bags or plastic containers and requires only the addition of water. The product can be used from 10mm-75mm in one pass, with greater depths possible using the layer-upon-layer method.
M60 F achieves exceptional bond strength without the use of a primer. The product can be bulked out with the addition of up to 30% hard stone clean aggregate. Please note that this will reduce the product’s strength gain and alter its performance characteristics.
Preparation
All surfaces should be free from oil, grease, dust or any other visible contaminants. Remove all loose particles and work on a sound substrate. Pre-soak the area with clean water prior to application to aid bond. Remove ponded water before applying the product.
Mixing
M60 F can be mixed with a forced action mixer or by hand with an appropriate tool. If hand mixing is used, ensure that it is vigorous. 25kg of product will require approximately 3 litres of water. A stiff consistent mix with no slump should be achieved, ensuring all particles are well wetted.
Note: Mix only enough material to apply within 4 minutes. Never remix or add extra water.
Placing
Apply the bedding material over a pre-soaked area. Once mixed, M60 F should be applied to the supporting structure within 4 minutes. Firm well into position using a float and allowing a 5mm excess thickness. Place the frame onto the bedding mortar ensuring it is fully supported. Check that the frame does not overhang the mortar at any point (use suitable lifting equipment when positioning the frame).
Care must be taken to prevent voids in the bedding material under the frame, especially in the cover seating area. The frame should then be tamped into place ensuring the correct level is obtained. Any holes within the frame should be infilled and the flanges of the frame enveloped by a minimum thickness of 10mm of the bedding material. Exposed surfaces of the bedding material should be float finished, ensuring voids are filled. Remove loose materials and point the inside surface to a smooth finish. Once the bedding material has reached its initial set, the backfill material UltraCrete QC10 F concrete can be placed.
Cleaning
M60 F should be removed from tools and equipment with clean water immediately after use. Cured material can also be removed mechanically.
Storage
Store in closed original packaging at temperatures between 5°C and 30°C. Avoid frost.
Shelf life
Shelf life in correct conditions for sealed packaging is 8 months. High temperatures and high humidity will lead to a reduced shelf life.
Trade discounts
Save with a pallet deal – includes Free Delivery
View M60F deal on 56x 25kg bags
Technical information
- M60 F is supplied pre-blended in 25kg reinforced paper bags and requires only the addition of water.
- The product can be used from 10mm-75mm in one pass. Greater depths are possible using the layer-upon-layer method.
- Achieves exceptional bond strength without the use of an additional primer.
- Can be bulked out with the addition of up to 30% hard stone clean aggregate. Please note that this will reduce the product’s strength gain and alter its performance characteristics (we always recommend a patch test if additional aggregate is added).
- Download the technical datasheet (pdf)
How to prepare surfaces for M60 F bedding mortar
- All surfaces should be free from oil, grease, dust or any other visible contaminants.
- Remove all loose particles and work on a sound substrate.
- Pre-soak the area with clean water prior to application to aid bond.
- Remove ponded water before applying the product.
How to mix M60 F
- Mix with a forced action mixer or by hand with an appropriate tool.
- If hand mixing is used, ensure that it is vigorous.
- 25kg of product will require approximately 3 litres of water.
- A stiff consistent mix with no slump should be achieved, ensuring all particles are well wetted.
- Mix only enough material to apply within 4 minutes.
- Never remix or add extra water.
How to apply M60 F bedding mortar
- Apply the bedding material over a pre-soaked area.
- Once mixed, M60 F should be applied to the supporting structure within 4 minutes.
- Firm well into position using a float and allowing a 5mm excess thickness.
- Place the frame onto the bedding mortar ensuring it is fully supported. Check that the frame does not overhang the mortar at any point (use suitable lifting equipment when positioning the frame). Care must be taken to prevent voids in the bedding material under the frame, especially in the cover seating area.
- The frame should then be tamped into place ensuring the correct level is obtained.
- Any holes within the frame should be in- filled and the flanges of the frame enveloped by a minimum thickness of 10mm of the bedding material.
- Exposed surfaces of the bedding material should be float finished, ensuring voids are filled.
- Remove loose materials and point the inside surface to a smooth finish.
- Once the bedding material has reached its initial set, the backfill material UltraCrete QC10 F concrete can be placed.
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
Ultracrete M60 F: Fibre Reinforced Bedding Mortar
Ultracrete M60F is a market leading, fibre reinforced bedding mortar for superior strength gain, the addition of fibre to the mix improves the flexural and tensile strength. M60F is ideal for use with all access covers, as well as for the bonding of granite setts, flags and bedding kerbs. Use of this rapid strength gain mortar means that repairs can be open to traffic in just 60 minutes.
- Improved flexural and tensile strength
- Contains recycled material
- Rapid strength gain
- Fibre reinforced
- Compressive strength after 1 hour 25N/mm2 (31:50 N/mm2 after 2 hours)
- Enhanced performance
- Shrinkage compensated
- Open to traffic: 60 minutes
- Conforms to HD27/15
- Coverage:Approx 1 x 400mm x 400mm standard ironwork cover and frame @ 25mm, dependant on bed depth, brickwork and substrate
- Size: 25kg reinforced paper bag
- Download the technical datasheet (pdf)
Applications
UltraCrete M60 F is a fibre reinforced, superior strength bedding mortar for use with all access covers, as well as for the rapid bonding of granite setts and flags, emergency repairs and bedding of kerbs.
Technical
M60 F is supplied pre-blended in 25kg bags or plastic containers and requires only the addition of water. The product can be used from 10mm-75mm in one pass, with greater depths possible using the layer-upon-layer method.
M60 F achieves exceptional bond strength without the use of a primer. The product can be bulked out with the addition of up to 30% hard stone clean aggregate. Please note that this will reduce the product’s strength gain and alter its performance characteristics.
Preparation
All surfaces should be free from oil, grease, dust or any other visible contaminants. Remove all loose particles and work on a sound substrate. Pre-soak the area with clean water prior to application to aid bond. Remove ponded water before applying the product.
Mixing
M60 F can be mixed with a forced action mixer or by hand with an appropriate tool. If hand mixing is used, ensure that it is vigorous. 25kg of product will require approximately 3 litres of water. A stiff consistent mix with no slump should be achieved, ensuring all particles are well wetted.
Note: Mix only enough material to apply within 4 minutes. Never remix or add extra water.
Placing
Apply the bedding material over a pre-soaked area. Once mixed, M60 F should be applied to the supporting structure within 4 minutes. Firm well into position using a float and allowing a 5mm excess thickness. Place the frame onto the bedding mortar ensuring it is fully supported. Check that the frame does not overhang the mortar at any point (use suitable lifting equipment when positioning the frame).
Care must be taken to prevent voids in the bedding material under the frame, especially in the cover seating area. The frame should then be tamped into place ensuring the correct level is obtained. Any holes within the frame should be infilled and the flanges of the frame enveloped by a minimum thickness of 10mm of the bedding material. Exposed surfaces of the bedding material should be float finished, ensuring voids are filled. Remove loose materials and point the inside surface to a smooth finish. Once the bedding material has reached its initial set, the backfill material UltraCrete QC10 F concrete can be placed.
Cleaning
M60 F should be removed from tools and equipment with clean water immediately after use. Cured material can also be removed mechanically.
Storage
Store in closed original packaging at temperatures between 5°C and 30°C. Avoid frost.
Shelf life
Shelf life in correct conditions for sealed packaging is 8 months. High temperatures and high humidity will lead to a reduced shelf life.
Trade discounts
Save with a pallet deal – includes Free Delivery
View M60F deal on 56x 25kg bags
Technical information
- M60 F is supplied pre-blended in 25kg reinforced paper bags and requires only the addition of water.
- The product can be used from 10mm-75mm in one pass. Greater depths are possible using the layer-upon-layer method.
- Achieves exceptional bond strength without the use of an additional primer.
- Can be bulked out with the addition of up to 30% hard stone clean aggregate. Please note that this will reduce the product’s strength gain and alter its performance characteristics (we always recommend a patch test if additional aggregate is added).
- Download the technical datasheet (pdf)
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
How to prepare surfaces for M60 F bedding mortar
- All surfaces should be free from oil, grease, dust or any other visible contaminants.
- Remove all loose particles and work on a sound substrate.
- Pre-soak the area with clean water prior to application to aid bond.
- Remove ponded water before applying the product.
How to mix M60 F
- Mix with a forced action mixer or by hand with an appropriate tool.
- If hand mixing is used, ensure that it is vigorous.
- 25kg of product will require approximately 3 litres of water.
- A stiff consistent mix with no slump should be achieved, ensuring all particles are well wetted.
- Mix only enough material to apply within 4 minutes.
- Never remix or add extra water.
How to apply M60 F bedding mortar
- Apply the bedding material over a pre-soaked area.
- Once mixed, M60 F should be applied to the supporting structure within 4 minutes.
- Firm well into position using a float and allowing a 5mm excess thickness.
- Place the frame onto the bedding mortar ensuring it is fully supported. Check that the frame does not overhang the mortar at any point (use suitable lifting equipment when positioning the frame). Care must be taken to prevent voids in the bedding material under the frame, especially in the cover seating area.
- The frame should then be tamped into place ensuring the correct level is obtained.
- Any holes within the frame should be in- filled and the flanges of the frame enveloped by a minimum thickness of 10mm of the bedding material.
- Exposed surfaces of the bedding material should be float finished, ensuring voids are filled.
- Remove loose materials and point the inside surface to a smooth finish.
- Once the bedding material has reached its initial set, the backfill material UltraCrete QC10 F concrete can be placed.