UltraCrete Instagrip 15Kg
About the product
Ultracrete Instagrip is an anti-skid patch repair to prevent slips, trips & falls on surface areas where pedestrians may walk after maintenance work has taken place. Perfect for pedestrian crossings, junctions, roundabouts, footbridges, subways, car parks, steel road plates and manhole cover frames. Size: 15kg bucket
Got a question about Instagrip? Download the technical datasheet (pdf) or see the pothole repair FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. We’re a small team, but happy to help. 
Ordering a large quantity? Contact us about discounts on bulk orders.
Calculate required quantity
UltraCrete Instagrip 15Kg
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
How much you will need?
Technical information
Instagrip is a two-part solvent free polyurethane resin system, dressed with calcined bauxite aggregate. The product conforms to the Specification for Highways Works, clause 924 and Chapter 6 High Friction Surfacing of the Specification for the Reinstatement of openings in Highways, for resin-based skid resistant surface treatments. Download Instagrip technical datasheet (pdf)Important notes
Instagrip is supplied as a two-component system in pre-weighed packs. The resin has a pot life of between 10 and 20 minutes dependant on the ambient temperature and humidity. The aggregate is supplied with the pack. Do not add the aggregate to the resin. The maximum application area on smooth surfaces is 1.5m2 per pack. On more open or textured surfaces the pack coverage area will be reduced. Note: If the maximum application area is exceeded, this will result in failure of the system. Avoid usage in temperatures below 5°C and above 30°C.How to mix and apply Instagrip Anti-Skid Patch Repair
Wearing the disposable gloves provided in the pack:- Mix the two components together by adding the full contents of the activator bottle to the resin base in the tub. DO NOT part mix.
- Mix the two parts thoroughly by means of the wooden spatula provided.
- After mixing, pour the resin out onto the area marked out within the masking tape with the plastic applicator.
- Spread out the resin mixture until the area is fully covered, paying particular attention to the edges and corners.
- The aggregate should be scattered onto the resin as soon as possible, before it begins to set.
- Any resin bleed should be covered by aggregate.
- Once fully set, sweep the excess aggregate away.
- After completion, the surface should not be opened to traffic or otherwise disturbed until the binder has completely cured, typically 1 to 2 hours depending on temperature and humidity.
About the product
Ultracrete Instagrip is an anti-skid patch repair to prevent slips, trips & falls on surface areas where pedestrians may walk after maintenance work has taken place. Perfect for pedestrian crossings, junctions, roundabouts, footbridges, subways, car parks, steel road plates and manhole cover frames. Size: 15kg bucket
Got a question about Instagrip? Download the technical datasheet (pdf) or see the pothole repair FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. We’re a small team, but happy to help.
Ordering a large quantity? Contact us about discounts on bulk orders.
Instagrip: Anti-Skid Patch Repair
Instagrip is ideal for the patching and reinstating of high friction areas after maintenance work has taken place. It is perfect for use on pedestrian crossings, junctions, roundabouts, footbridges, subways, steel plates and manhole covers.
- Restores anti-skid
- Set time: 1 – 2 hours
- Easy to use
- Fast return to service
- Available in: Grey, Buff, Red, Green and Black
- Size: 15kg bucket (36 units per pallet)
- Calculation based on 1.5m² per 15kg tub assuming smooth surface. Coverage will be affected by surface texture
Download Instagrip technical datasheet (pdf)
Ordering a large quantity? Get in touch with our team to save with a bulk deal.
- Brand: Instarmac
- SKU: TPE-ULTINSGREDD6
- Weight: 15.0 kg / 33.07 lb
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
For any advice; technical, product, stock or quantity needed, call our team on 0330 122 1025.
Please see our FAQs for more information.
Instagrip: Anti-Skid Patch Repair
Instagrip is ideal for the patching and reinstating of high friction areas after maintenance work has taken place. It is perfect for use on pedestrian crossings, junctions, roundabouts, footbridges, subways, steel plates and manhole covers.
- Restores anti-skid
- Set time: 1 – 2 hours
- Easy to use
- Fast return to service
- Available in: Grey, Buff, Red, Green and Black
- Size: 15kg bucket (36 units per pallet)
- Calculation based on 1.5m² per 15kg tub assuming smooth surface. Coverage will be affected by surface texture
Download Instagrip technical datasheet (pdf)
Ordering a large quantity? Get in touch with our team to save with a bulk deal.
Technical information
Instagrip is a two-part solvent free polyurethane resin system, dressed with calcined bauxite aggregate. The product conforms to the Specification for Highways Works, clause 924 and Chapter 6 High Friction Surfacing of the Specification for the Reinstatement of openings in Highways, for resin-based skid resistant surface treatments. Download Instagrip technical datasheet (pdf)Important notes
Instagrip is supplied as a two-component system in pre-weighed packs. The resin has a pot life of between 10 and 20 minutes dependant on the ambient temperature and humidity. The aggregate is supplied with the pack. Do not add the aggregate to the resin. The maximum application area on smooth surfaces is 1.5m2 per pack. On more open or textured surfaces the pack coverage area will be reduced. Note: If the maximum application area is exceeded, this will result in failure of the system. Avoid usage in temperatures below 5°C and above 30°C.How to mix and apply Instagrip Anti-Skid Patch Repair
Wearing the disposable gloves provided in the pack:- Mix the two components together by adding the full contents of the activator bottle to the resin base in the tub. DO NOT part mix.
- Mix the two parts thoroughly by means of the wooden spatula provided.
- After mixing, pour the resin out onto the area marked out within the masking tape with the plastic applicator.
- Spread out the resin mixture until the area is fully covered, paying particular attention to the edges and corners.
- The aggregate should be scattered onto the resin as soon as possible, before it begins to set.
- Any resin bleed should be covered by aggregate.
- Once fully set, sweep the excess aggregate away.
- After completion, the surface should not be opened to traffic or otherwise disturbed until the binder has completely cured, typically 1 to 2 hours depending on temperature and humidity.
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
Instagrip: Anti-Skid Patch Repair
Instagrip is ideal for the patching and reinstating of high friction areas after maintenance work has taken place. It is perfect for use on pedestrian crossings, junctions, roundabouts, footbridges, subways, steel plates and manhole covers.
- Restores anti-skid
- Set time: 1 – 2 hours
- Easy to use
- Fast return to service
- Available in: Grey, Buff, Red, Green and Black
- Size: 15kg bucket (36 units per pallet)
- Calculation based on 1.5m² per 15kg tub assuming smooth surface. Coverage will be affected by surface texture
Download Instagrip technical datasheet (pdf)
Ordering a large quantity? Get in touch with our team to save with a bulk deal.
Technical information
Instagrip is a two-part solvent free polyurethane resin system, dressed with calcined bauxite aggregate. The product conforms to the Specification for Highways Works, clause 924 and Chapter 6 High Friction Surfacing of the Specification for the Reinstatement of openings in Highways, for resin-based skid resistant surface treatments. Download Instagrip technical datasheet (pdf)Important notes
Instagrip is supplied as a two-component system in pre-weighed packs. The resin has a pot life of between 10 and 20 minutes dependant on the ambient temperature and humidity. The aggregate is supplied with the pack. Do not add the aggregate to the resin. The maximum application area on smooth surfaces is 1.5m2 per pack. On more open or textured surfaces the pack coverage area will be reduced. Note: If the maximum application area is exceeded, this will result in failure of the system. Avoid usage in temperatures below 5°C and above 30°C.Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
How to mix and apply Instagrip Anti-Skid Patch Repair
Wearing the disposable gloves provided in the pack:- Mix the two components together by adding the full contents of the activator bottle to the resin base in the tub. DO NOT part mix.
- Mix the two parts thoroughly by means of the wooden spatula provided.
- After mixing, pour the resin out onto the area marked out within the masking tape with the plastic applicator.
- Spread out the resin mixture until the area is fully covered, paying particular attention to the edges and corners.
- The aggregate should be scattered onto the resin as soon as possible, before it begins to set.
- Any resin bleed should be covered by aggregate.
- Once fully set, sweep the excess aggregate away.
- After completion, the surface should not be opened to traffic or otherwise disturbed until the binder has completely cured, typically 1 to 2 hours depending on temperature and humidity.