UltraCrete Kerb and Patch Repair 10KG
About the product
Ultracrete Kerb & Patch small repair concrete (FP-1) is the perfect rapid set mortar, for small repairs when strength can’t be compromised. Ideal for kerbs, steps and the removal of dangerous trip hazards. Kerb & Patch Repair mortar comes in a handy 10KG Tub – with no additional water necessary! Kerb and Patch repair concrete can accommodate depths of 10-100mm and can be filled in one application, repaired areas can be open to traffic in just 2 hours. Available in a small compact tub for easy storage in your car or van, lightweight to carry especially when repairing stairs in flats, carparks or up large flights of stairs!
Got a question about Kerb & Patch Repair? Download the technical datasheet (pdf) or see the pothole repair FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. Or alternatively, call ☎️ 0330 122 1025 – we’re a small team, but happy to help. 😊✨
We aim to offer the best prices and service online. If you’ve found a better price please get in touch!
UltraCrete Kerb and Patch Repair 10KG
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
About the product
Ultracrete Kerb & Patch small repair concrete (FP-1) is the perfect rapid set mortar, for small repairs when strength can’t be compromised. Ideal for kerbs, steps and the removal of dangerous trip hazards. Kerb & Patch Repair mortar comes in a handy 10KG Tub – with no additional water necessary! Kerb and Patch repair concrete can accommodate depths of 10-100mm and can be filled in one application, repaired areas can be open to traffic in just 2 hours. Available in a small compact tub for easy storage in your car or van, lightweight to carry especially when repairing stairs in flats, carparks or up large flights of stairs!
Got a question about Kerb & Patch Repair? Download the technical datasheet (pdf) or see the pothole repair FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. Or alternatively, call ☎️ 0330 122 1025 – we’re a small team, but happy to help. 😊✨
We aim to offer the best prices and service online. If you’ve found a better price please get in touch!
UltraCrete Kerb and Patch Repair (FORMERLY FP-1)
Kerb and Patch Repair is ideal for the reinstatement of small areas requiring less than a ready-mix quantity for example, the reinstatement of trip hazards, kerbs and steps. This high strength patch and kerb repair can be opened to traffic in just 2 hours.
Kerb & Patch Repair is supplied in 10KG plastic tub, and comes as a two-part system, which comprises a fully pre-blended mix of special cements and aggregates and a polymer modified liquid admixture, which makes it perfect for carrying out small repairs quickly onsite. You simply mix the pre-blended cements and aggregates vigorously with the primer liquid in the supplied bucket, if you need a slightly wetter consistency a small amount of water may be added to produce a stiff, slump-free concrete.
- Workability: 7 minutes
- Set time: 25 minutes
- Depth: 10-100mm
- 50N/mm² compressive strength at 28 days
- 8.09N/mm² tensile strength at 28 days
- No waste
- Size: 10KG bucket
- Download the technical datasheet (pdf)
Applications
UltraCrete Kerb and Patch Repair is a two-component rapid repair mortar, ideal for the reinstatement of small areas such as trip hazards, kerbs and steps where prompt access is required.
Technical
Kerb and Patch Repair, supplied in 10KG plastic containers, is a two-part system, comprising of a fully pre-blended mix of special cements and aggregates and a polymer modified liquid admixture. The product allows for depths of 10mm to 100mm to be achieved in one application. Kerb and Patch Repair should not be used at temperatures below 5°C during application or initial set.
Preparation
All surfaces should be free from oil, grease, dust or any other visible contaminants. Smooth substrates must be mechanically roughened, e.g. by scabbling or needle gun, followed by washing with clean water to remove all loose particles. Always work on a sound substrate. It is essential that repair edges are saw cut to a minimum depth of 10mm, feather edging is not recommended.
Priming
Use the supplied primer (white liquid included in the pack) to prime the surfaces prior to application, paying particular attention to the edges of the repair. Note: Do not allow the primer to dry.
Mixing
Mix the blended cements and aggregates vigorously with the remaining primer liquid. A little water may be added to produce a stiff slump-free homogeneous compound.
Placing
Kerb and Patch Repair should be applied firmly into position as soon as possible after mixing. Pay particular attention to edges and thin sections. Level up to the surface and finish using a steel float or trowel to close up the surface and seal the edges. Kerb and Patch Repair is ideal for small areas of repair. Larger patches may require an alternative product such as FTC.
Storage
Powder: Store in closed original container at temperatures between 5°C and 30°C. Avoid frost. This product must be stored in unopened tubs, clear of the ground in cool dry conditions and protected from excessive drafts. If stored correctly and used within 8 months of the date shown on the tub, the activity of the reducing agent will be maintained and this product will contain, when mixed with water, no more than 0.0002% (2 ppm) soluble Chromium (VI) of the total dry weight of the cement.
Liquid: Store in tightly closed original container in a dry, cool and well-ventilated place. Extreme temperatures can damage this product in its liquid form. Store containers at temperatures between 5°C & 30°C. Liquid should not be exposed to excess heat, cold or frost during storage or when being transported between sites.
Shelf life
Shelf life from date of manufacture in correct conditions for sealed packaging is 8 months. Note: The use of this product after the end of the declared storage period may increase the risk of an allergic reaction. High temperatures and high humidity will lead to a reduced shelf life.
If you need any further information, or would like a copy of the safety or technical data then please do not hesitate to give us a call on ☎️ 0330 122 1025
- Brand: Instarmac
- SKU: TPE-ULTKERBPATCH
- Weight: 25.0 kg / 55.12 lb
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
For any advice; technical, product, stock or quantity needed, call our team on 0330 122 1025.
Please see our FAQs for more information.
UltraCrete Kerb and Patch Repair (FORMERLY FP-1)
Kerb and Patch Repair is ideal for the reinstatement of small areas requiring less than a ready-mix quantity for example, the reinstatement of trip hazards, kerbs and steps. This high strength patch and kerb repair can be opened to traffic in just 2 hours.
Kerb & Patch Repair is supplied in 10KG plastic tub, and comes as a two-part system, which comprises a fully pre-blended mix of special cements and aggregates and a polymer modified liquid admixture, which makes it perfect for carrying out small repairs quickly onsite. You simply mix the pre-blended cements and aggregates vigorously with the primer liquid in the supplied bucket, if you need a slightly wetter consistency a small amount of water may be added to produce a stiff, slump-free concrete.
- Workability: 7 minutes
- Set time: 25 minutes
- Depth: 10-100mm
- 50N/mm² compressive strength at 28 days
- 8.09N/mm² tensile strength at 28 days
- No waste
- Size: 10KG bucket
- Download the technical datasheet (pdf)
Applications
UltraCrete Kerb and Patch Repair is a two-component rapid repair mortar, ideal for the reinstatement of small areas such as trip hazards, kerbs and steps where prompt access is required.
Technical
Kerb and Patch Repair, supplied in 10KG plastic containers, is a two-part system, comprising of a fully pre-blended mix of special cements and aggregates and a polymer modified liquid admixture. The product allows for depths of 10mm to 100mm to be achieved in one application. Kerb and Patch Repair should not be used at temperatures below 5°C during application or initial set.
Preparation
All surfaces should be free from oil, grease, dust or any other visible contaminants. Smooth substrates must be mechanically roughened, e.g. by scabbling or needle gun, followed by washing with clean water to remove all loose particles. Always work on a sound substrate. It is essential that repair edges are saw cut to a minimum depth of 10mm, feather edging is not recommended.
Priming
Use the supplied primer (white liquid included in the pack) to prime the surfaces prior to application, paying particular attention to the edges of the repair. Note: Do not allow the primer to dry.
Mixing
Mix the blended cements and aggregates vigorously with the remaining primer liquid. A little water may be added to produce a stiff slump-free homogeneous compound.
Placing
Kerb and Patch Repair should be applied firmly into position as soon as possible after mixing. Pay particular attention to edges and thin sections. Level up to the surface and finish using a steel float or trowel to close up the surface and seal the edges. Kerb and Patch Repair is ideal for small areas of repair. Larger patches may require an alternative product such as FTC.
Storage
Powder: Store in closed original container at temperatures between 5°C and 30°C. Avoid frost. This product must be stored in unopened tubs, clear of the ground in cool dry conditions and protected from excessive drafts. If stored correctly and used within 8 months of the date shown on the tub, the activity of the reducing agent will be maintained and this product will contain, when mixed with water, no more than 0.0002% (2 ppm) soluble Chromium (VI) of the total dry weight of the cement.
Liquid: Store in tightly closed original container in a dry, cool and well-ventilated place. Extreme temperatures can damage this product in its liquid form. Store containers at temperatures between 5°C & 30°C. Liquid should not be exposed to excess heat, cold or frost during storage or when being transported between sites.
Shelf life
Shelf life from date of manufacture in correct conditions for sealed packaging is 8 months. Note: The use of this product after the end of the declared storage period may increase the risk of an allergic reaction. High temperatures and high humidity will lead to a reduced shelf life.
If you need any further information, or would like a copy of the safety or technical data then please do not hesitate to give us a call on ☎️ 0330 122 1025
Technical information
- Workability: 7 minutes
- Set time: 25 minutes
- Depth: 10-100mm
- 50N/mm² compressive strength at 28 days
- 8.09N/mm² tensile strength at 28 days
- Zero waste
- Size: 10kg plastic bucket
How to prepare surfaces for Kerb & Patch Repair
All surfaces should be free from oil, grease, dust or any other visible contaminants. Smooth substrates must be mechanically roughened, e.g. by scabbling or needle gun, followed by washing with clean water to remove all loose particles. Always work on a sound substrate. It is essential that repair edges are saw cut to a minimum depth of 10mm, feather edging is not recommended.Use the supplied primer
Prime the surfaces prior to application using the primer (the white liquid included in the pack). Pay particular attention to the edges of the repair. Note: Do not allow the primer to dry.How to mix Kerb & Patch Repair
Mix the blended cements and aggregates vigorously with the remaining primer liquid. A little water may be added to produce a stiff slump-free homogeneous compound.Placing Kerb & Patch Repair
Kerb & Patch Repair should be applied firmly into position as soon as possible after mixing. Pay particular attention to edges and thin sections. Level up to the surface and finish using a steel float or trowel to close up the surface and seal the edges.Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
UltraCrete Kerb and Patch Repair (FORMERLY FP-1)
Kerb and Patch Repair is ideal for the reinstatement of small areas requiring less than a ready-mix quantity for example, the reinstatement of trip hazards, kerbs and steps. This high strength patch and kerb repair can be opened to traffic in just 2 hours.
Kerb & Patch Repair is supplied in 10KG plastic tub, and comes as a two-part system, which comprises a fully pre-blended mix of special cements and aggregates and a polymer modified liquid admixture, which makes it perfect for carrying out small repairs quickly onsite. You simply mix the pre-blended cements and aggregates vigorously with the primer liquid in the supplied bucket, if you need a slightly wetter consistency a small amount of water may be added to produce a stiff, slump-free concrete.
- Workability: 7 minutes
- Set time: 25 minutes
- Depth: 10-100mm
- 50N/mm² compressive strength at 28 days
- 8.09N/mm² tensile strength at 28 days
- No waste
- Size: 10KG bucket
- Download the technical datasheet (pdf)
Applications
UltraCrete Kerb and Patch Repair is a two-component rapid repair mortar, ideal for the reinstatement of small areas such as trip hazards, kerbs and steps where prompt access is required.
Technical
Kerb and Patch Repair, supplied in 10KG plastic containers, is a two-part system, comprising of a fully pre-blended mix of special cements and aggregates and a polymer modified liquid admixture. The product allows for depths of 10mm to 100mm to be achieved in one application. Kerb and Patch Repair should not be used at temperatures below 5°C during application or initial set.
Preparation
All surfaces should be free from oil, grease, dust or any other visible contaminants. Smooth substrates must be mechanically roughened, e.g. by scabbling or needle gun, followed by washing with clean water to remove all loose particles. Always work on a sound substrate. It is essential that repair edges are saw cut to a minimum depth of 10mm, feather edging is not recommended.
Priming
Use the supplied primer (white liquid included in the pack) to prime the surfaces prior to application, paying particular attention to the edges of the repair. Note: Do not allow the primer to dry.
Mixing
Mix the blended cements and aggregates vigorously with the remaining primer liquid. A little water may be added to produce a stiff slump-free homogeneous compound.
Placing
Kerb and Patch Repair should be applied firmly into position as soon as possible after mixing. Pay particular attention to edges and thin sections. Level up to the surface and finish using a steel float or trowel to close up the surface and seal the edges. Kerb and Patch Repair is ideal for small areas of repair. Larger patches may require an alternative product such as FTC.
Storage
Powder: Store in closed original container at temperatures between 5°C and 30°C. Avoid frost. This product must be stored in unopened tubs, clear of the ground in cool dry conditions and protected from excessive drafts. If stored correctly and used within 8 months of the date shown on the tub, the activity of the reducing agent will be maintained and this product will contain, when mixed with water, no more than 0.0002% (2 ppm) soluble Chromium (VI) of the total dry weight of the cement.
Liquid: Store in tightly closed original container in a dry, cool and well-ventilated place. Extreme temperatures can damage this product in its liquid form. Store containers at temperatures between 5°C & 30°C. Liquid should not be exposed to excess heat, cold or frost during storage or when being transported between sites.
Shelf life
Shelf life from date of manufacture in correct conditions for sealed packaging is 8 months. Note: The use of this product after the end of the declared storage period may increase the risk of an allergic reaction. High temperatures and high humidity will lead to a reduced shelf life.
If you need any further information, or would like a copy of the safety or technical data then please do not hesitate to give us a call on ☎️ 0330 122 1025
Technical information
- Workability: 7 minutes
- Set time: 25 minutes
- Depth: 10-100mm
- 50N/mm² compressive strength at 28 days
- 8.09N/mm² tensile strength at 28 days
- Zero waste
- Size: 10kg plastic bucket
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.