UltraCrete M90 (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
About the product
M90 general purpose fast set, superior strength mortar, is ideal for the bedding of ironwork, access covers & is also ideal for general repairs. M90 conforms to HD27/04, sets in just 20 minutes & can roads and pavements can be open to the general public and traffic in as little as 90 minutes. M90 has a workability time of 5 – 10 minutes, and can be laid in depths from 10mm – 75mm. It achieves a compressive strength of 21N/mm² in just 2 hours.
Got a question about M90? Download the technical datasheet (pdf) or see our comprehensive FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. We’re a small team, but happy to help. 
We aim to offer the cheapest products online. If you find M90 cheaper anywhere else please get in touch!
Calculate required quantity
UltraCrete M90 (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
Standard 3-5 day free delivery on pallets applies to England only. For all other regions please call for a quote.
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
Standard 3-5 day free delivery on pallets applies to England only. For all other regions please call for a quote.
How much you will need?
Technical information
- M90 is supplied pre-blended in 25kg reinforced paper bags (25kg plastic tubs also available).
- The mortar only requires the addition of water to create a superior strength mortar.
- Simply mix on site with a forced action mixer or by hand with an appropriate tool.
- Use from 10mm-75mm in one pass, with greater depths possible using a layer-upon-layer method.
- Exceptional bond strength without the need for a primer.
- The product can be bulked out with the addition of up to 30% hard stone clean aggregate. Please note that this will reduce the products strength gain and alter its performance characteristics (we always recommend testing a small patch prior to full application when adding additional aggregate).
How to prepare surfaces for M90
- Surfaces should be free from any contamination of oil, grease, paint, etc.
- Remove all loose particles and work on a sound substrate.
- Pre-soak the area with clean water prior to application to aid bond. Remove ponded water before applying the product.
How to mix M90 All Purpose Fast Set Mortar
- M90 can be mixed with a forced action mixer or by hand with an appropriate tool.
- If hand mixing is used, ensure that it is vigorous.
- 25kg of product will require approximately 3 litres of water.
- A stiff consistent mix with no slump should be achieved, ensuring all particles are well wetted.
- Mix only enough material to apply within 4 minutes.
- Never remix or add extra water.
How to apply M90 Fast Set Mortar
- Apply the bedding material over a pre-soaked area.
- Once mixed, M90 should be applied to the supporting structure within 4 minutes.
- Firm well into position using a float and allow a 5mm excess thickness.
- Place the frame onto the bedding mortar ensuring it is fully supported. Check that the frame does not overhang the mortar at any point (use suitable lifting equipment when positioning the frame). Care must be taken to prevent voids in the bedding material under the frame, especially in the cover seating area.
- The frame should then be tamped into place ensuring the correct level is obtained.
- Any holes within the frame should be in-filled and the flanges of the frame enveloped by a minimum thickness of 10mm of the bedding material.
- Exposed surfaces of the bedding material should be float finished, ensuring voids are filled.
- Remove loose materials and point the inside surface to a smooth finish.
- Once the bedding material has reached its initial set, the backfill material can be placed.
About the product
M90 general purpose fast set, superior strength mortar, is ideal for the bedding of ironwork, access covers & is also ideal for general repairs. M90 conforms to HD27/04, sets in just 20 minutes & can roads and pavements can be open to the general public and traffic in as little as 90 minutes. M90 has a workability time of 5 – 10 minutes, and can be laid in depths from 10mm – 75mm. It achieves a compressive strength of 21N/mm² in just 2 hours.
Got a question about M90? Download the technical datasheet (pdf) or see our comprehensive FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. We’re a small team, but happy to help.
We aim to offer the cheapest products online. If you find M90 cheaper anywhere else please get in touch!
Ultracrete M90 All Purpose Fast Set Mortar (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
Ultracrete M90 is a general, all purpose mortar which sets in just 20 minutes and can be open to traffic in 90 minutes flat! This superior, fast setting super strength mortar is ideal for bedding ironwork, all access covers and carrying out general repairs to roads and floors. M90 mortar is ideal for use on all ironwork which conforms to BS EN 124, and meets the stringent guidelines of HD27/04. Due to its rapid set & strength gain, the use of M90 means that repairs and works carried out can be opened to traffic in just 90 minutes, saving time, budget and preventing disruption to motorists and the wider population.
- Workability: 5 – 10 minutes
- Set time: 20 minutes
- Depth: 10mm – 75mm
- 21N/mm² compressive strength in 2 hours
- Approved for use on the London Underground and Overground
- Pallet Deal - 56 x 25kg reinforced paper bags
- Comes with Free Delivery 🚚
- Download the M90 technical datasheet (pdf)
- Brand: Instarmac
- SKU: TPE-PALM90BAGX56
- Weight: 1000.0 kg / 2204.62 lb
Delivery & Returns Info
Our delivery charges are calculated based on the size and weight of your order. When you add items to your basket, the delivery charges are displayed. Small orders are distributed via courier; larger orders via Pallet Network. Collection is available from our Tamworth depot by request (contact us first to arrange on 0330 122 1025).
Please note, there is a slight surcharge for areas that are outside of our locality, charges calculated at checkout.
| Weight and size | Next Working Day* Order before 1PM (excl. VAT) |
Standard 3-5 Working Day (excl. VAT) |
|---|---|---|
| 0-13KG (1 small bag/tub) |
£14.00 | £9.00 |
| 13.01-25KG (1 large bag/tub) |
£16.00 | £10.00 |
| 25.01-50KG (2 bags/tubs) |
£26.00 | £19.00 |
| 50.01-75KG (3 bags/tubs) |
£36.00 | £28.00 |
| 75.01-100KG (4-5 bags/tubs) |
£46.00 | £37.00 |
| 100.01-249KG (6-9 bags/tubs) |
£60.00 | £45.00 |
| 249.01-750KG (10 bags plus) |
£68.00 | £48.00 |
| 750.01KG plus (30 bags plus) |
£75.00 | £55.00 |
| Full Pallets (56 bags/52 tubs) |
£88.00 | Free of charge |
| Next Working Day delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
Delivery Information
- Prices apply to mainland England and Wales. Scottish delivery slight surcharge.
- Orders are packed and dispatched Monday–Friday (excluding weekends & public holidays).
Next Working Day Delivery
- Order before 1PM → same-day dispatch.
- Order after 1PM or on weekends/bank holidays → next working day dispatch.
- You'll receive tracking updates via email/SMS if you provide your details.
Delivery Examples
- Mon before 1PM → Packed Mon, delivered Tue.
- Mon after 1PM → Packed Tues delivered Wed.
- Fri before 1PM → Packed Fri, delivered Mon.
- Fri after 1PM/weekend → Packed Mon, delivered Tues (or Wed after a bank holiday).
- Standard Service: 3–5 working days.
Notes
- Occasional delays due to manufacturing, supply, or courier issues may happen, but we'll keep you informed.
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for the cost of returning goods to The Paving Experts, 20% admin restock fee applies. Need further info, click here.
For further detailed delivery information click here →
For any advice; technical, product, stock or quantity needed, call our team on 0330 122 1025.
Please see our FAQs for more information.
Ultracrete M90 All Purpose Fast Set Mortar (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
Ultracrete M90 is a general, all purpose mortar which sets in just 20 minutes and can be open to traffic in 90 minutes flat! This superior, fast setting super strength mortar is ideal for bedding ironwork, all access covers and carrying out general repairs to roads and floors. M90 mortar is ideal for use on all ironwork which conforms to BS EN 124, and meets the stringent guidelines of HD27/04. Due to its rapid set & strength gain, the use of M90 means that repairs and works carried out can be opened to traffic in just 90 minutes, saving time, budget and preventing disruption to motorists and the wider population.
- Workability: 5 – 10 minutes
- Set time: 20 minutes
- Depth: 10mm – 75mm
- 21N/mm² compressive strength in 2 hours
- Approved for use on the London Underground and Overground
- Pallet Deal - 56 x 25kg reinforced paper bags
- Comes with Free Delivery 🚚
- Download the M90 technical datasheet (pdf)
Technical information
- M90 is supplied pre-blended in 25kg reinforced paper bags (25kg plastic tubs also available).
- The mortar only requires the addition of water to create a superior strength mortar.
- Simply mix on site with a forced action mixer or by hand with an appropriate tool.
- Use from 10mm-75mm in one pass, with greater depths possible using a layer-upon-layer method.
- Exceptional bond strength without the need for a primer.
- The product can be bulked out with the addition of up to 30% hard stone clean aggregate. Please note that this will reduce the products strength gain and alter its performance characteristics (we always recommend testing a small patch prior to full application when adding additional aggregate).
How to prepare surfaces for M90
- Surfaces should be free from any contamination of oil, grease, paint, etc.
- Remove all loose particles and work on a sound substrate.
- Pre-soak the area with clean water prior to application to aid bond. Remove ponded water before applying the product.
How to mix M90 All Purpose Fast Set Mortar
- M90 can be mixed with a forced action mixer or by hand with an appropriate tool.
- If hand mixing is used, ensure that it is vigorous.
- 25kg of product will require approximately 3 litres of water.
- A stiff consistent mix with no slump should be achieved, ensuring all particles are well wetted.
- Mix only enough material to apply within 4 minutes.
- Never remix or add extra water.
How to apply M90 Fast Set Mortar
- Apply the bedding material over a pre-soaked area.
- Once mixed, M90 should be applied to the supporting structure within 4 minutes.
- Firm well into position using a float and allow a 5mm excess thickness.
- Place the frame onto the bedding mortar ensuring it is fully supported. Check that the frame does not overhang the mortar at any point (use suitable lifting equipment when positioning the frame). Care must be taken to prevent voids in the bedding material under the frame, especially in the cover seating area.
- The frame should then be tamped into place ensuring the correct level is obtained.
- Any holes within the frame should be in-filled and the flanges of the frame enveloped by a minimum thickness of 10mm of the bedding material.
- Exposed surfaces of the bedding material should be float finished, ensuring voids are filled.
- Remove loose materials and point the inside surface to a smooth finish.
- Once the bedding material has reached its initial set, the backfill material can be placed.
Delivery & Returns Info
Our delivery charges are calculated based on the size and weight of your order. When you add items to your basket, the delivery charges are displayed. Small orders are distributed via courier; larger orders via Pallet Network. Collection is available from our Tamworth depot by request (contact us first to arrange on 0330 122 1025).
Please note, there is a slight surcharge for areas that are outside of our locality, charges calculated at checkout.
| Weight and size | Next Working Day* Order before 1PM (excl. VAT) |
Standard 3-5 Working Day (excl. VAT) |
|---|---|---|
| 0-13KG (1 small bag/tub) |
£14.00 | £9.00 |
| 13.01-25KG (1 large bag/tub) |
£16.00 | £10.00 |
| 25.01-50KG (2 bags/tubs) |
£26.00 | £19.00 |
| 50.01-75KG (3 bags/tubs) |
£36.00 | £28.00 |
| 75.01-100KG (4-5 bags/tubs) |
£46.00 | £37.00 |
| 100.01-249KG (6-9 bags/tubs) |
£60.00 | £45.00 |
| 249.01-750KG (10 bags plus) |
£68.00 | £48.00 |
| 750.01KG plus (30 bags plus) |
£75.00 | £55.00 |
| Full Pallets (56 bags/52 tubs) |
£88.00 | Free of charge |
| Next Working Day delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
Delivery Information
- Prices apply to mainland England and Wales. Scottish delivery slight surcharge.
- Orders are packed and dispatched Monday–Friday (excluding weekends & public holidays).
Next Working Day Delivery
- Order before 1PM → same-day dispatch.
- Order after 1PM or on weekends/bank holidays → next working day dispatch.
- You'll receive tracking updates via email/SMS if you provide your details.
Delivery Examples
- Mon before 1PM → Packed Mon, delivered Tue.
- Mon after 1PM → Packed Tues delivered Wed.
- Fri before 1PM → Packed Fri, delivered Mon.
- Fri after 1PM/weekend → Packed Mon, delivered Tues (or Wed after a bank holiday).
- Standard Service: 3–5 working days.
Notes
- Occasional delays due to manufacturing, supply, or courier issues may happen, but we'll keep you informed.
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for the cost of returning goods to The Paving Experts, 20% admin restock fee applies. Need further info, click here.
For further detailed delivery information click here →
Ultracrete M90 All Purpose Fast Set Mortar (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
Ultracrete M90 is a general, all purpose mortar which sets in just 20 minutes and can be open to traffic in 90 minutes flat! This superior, fast setting super strength mortar is ideal for bedding ironwork, all access covers and carrying out general repairs to roads and floors. M90 mortar is ideal for use on all ironwork which conforms to BS EN 124, and meets the stringent guidelines of HD27/04. Due to its rapid set & strength gain, the use of M90 means that repairs and works carried out can be opened to traffic in just 90 minutes, saving time, budget and preventing disruption to motorists and the wider population.
- Workability: 5 – 10 minutes
- Set time: 20 minutes
- Depth: 10mm – 75mm
- 21N/mm² compressive strength in 2 hours
- Approved for use on the London Underground and Overground
- Pallet Deal - 56 x 25kg reinforced paper bags
- Comes with Free Delivery 🚚
- Download the M90 technical datasheet (pdf)
Technical information
- M90 is supplied pre-blended in 25kg reinforced paper bags (25kg plastic tubs also available).
- The mortar only requires the addition of water to create a superior strength mortar.
- Simply mix on site with a forced action mixer or by hand with an appropriate tool.
- Use from 10mm-75mm in one pass, with greater depths possible using a layer-upon-layer method.
- Exceptional bond strength without the need for a primer.
- The product can be bulked out with the addition of up to 30% hard stone clean aggregate. Please note that this will reduce the products strength gain and alter its performance characteristics (we always recommend testing a small patch prior to full application when adding additional aggregate).
Delivery & Returns Info
Our delivery charges are calculated based on the size and weight of your order. When you add items to your basket, the delivery charges are displayed. Small orders are distributed via courier; larger orders via Pallet Network. Collection is available from our Tamworth depot by request (contact us first to arrange on 0330 122 1025).
Please note, there is a slight surcharge for areas that are outside of our locality, charges calculated at checkout.
| Weight and size | Next Working Day* Order before 1PM (excl. VAT) |
Standard 3-5 Working Day (excl. VAT) |
|---|---|---|
| 0-13KG (1 small bag/tub) |
£14.00 | £9.00 |
| 13.01-25KG (1 large bag/tub) |
£16.00 | £10.00 |
| 25.01-50KG (2 bags/tubs) |
£26.00 | £19.00 |
| 50.01-75KG (3 bags/tubs) |
£36.00 | £28.00 |
| 75.01-100KG (4-5 bags/tubs) |
£46.00 | £37.00 |
| 100.01-249KG (6-9 bags/tubs) |
£60.00 | £45.00 |
| 249.01-750KG (10 bags plus) |
£68.00 | £48.00 |
| 750.01KG plus (30 bags plus) |
£75.00 | £55.00 |
| Full Pallets (56 bags/52 tubs) |
£88.00 | Free of charge |
| Next Working Day delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
Delivery Information
- Prices apply to mainland England and Wales. Scottish delivery slight surcharge.
- Orders are packed and dispatched Monday–Friday (excluding weekends & public holidays).
Next Working Day Delivery
- Order before 1PM → same-day dispatch.
- Order after 1PM or on weekends/bank holidays → next working day dispatch.
- You'll receive tracking updates via email/SMS if you provide your details.
Delivery Examples
- Mon before 1PM → Packed Mon, delivered Tue.
- Mon after 1PM → Packed Tues delivered Wed.
- Fri before 1PM → Packed Fri, delivered Mon.
- Fri after 1PM/weekend → Packed Mon, delivered Tues (or Wed after a bank holiday).
- Standard Service: 3–5 working days.
Notes
- Occasional delays due to manufacturing, supply, or courier issues may happen, but we'll keep you informed.
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for the cost of returning goods to The Paving Experts, 20% admin restock fee applies. Need further info, click here.
For further detailed delivery information click here →
How to prepare surfaces for M90
- Surfaces should be free from any contamination of oil, grease, paint, etc.
- Remove all loose particles and work on a sound substrate.
- Pre-soak the area with clean water prior to application to aid bond. Remove ponded water before applying the product.
How to mix M90 All Purpose Fast Set Mortar
- M90 can be mixed with a forced action mixer or by hand with an appropriate tool.
- If hand mixing is used, ensure that it is vigorous.
- 25kg of product will require approximately 3 litres of water.
- A stiff consistent mix with no slump should be achieved, ensuring all particles are well wetted.
- Mix only enough material to apply within 4 minutes.
- Never remix or add extra water.
How to apply M90 Fast Set Mortar
- Apply the bedding material over a pre-soaked area.
- Once mixed, M90 should be applied to the supporting structure within 4 minutes.
- Firm well into position using a float and allow a 5mm excess thickness.
- Place the frame onto the bedding mortar ensuring it is fully supported. Check that the frame does not overhang the mortar at any point (use suitable lifting equipment when positioning the frame). Care must be taken to prevent voids in the bedding material under the frame, especially in the cover seating area.
- The frame should then be tamped into place ensuring the correct level is obtained.
- Any holes within the frame should be in-filled and the flanges of the frame enveloped by a minimum thickness of 10mm of the bedding material.
- Exposed surfaces of the bedding material should be float finished, ensuring voids are filled.
- Remove loose materials and point the inside surface to a smooth finish.
- Once the bedding material has reached its initial set, the backfill material can be placed.