Nexus ProJoint Fusion

About the product

Nexus ProJoint Fusion

£32.99 ex. VAT £39.59 inc VAT
PRICE PROMISE
ProJoint Fusion
In stock
£32.99
£39.59 inc VAT
PRICE PROMISE
Get Delivery By --
DELIVERY TO MAINLAND UK ONLY

For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.

Colour: Basalt
£32.99
£39.59 inc VAT
PRICE PROMISE
Get Delivery By --
DELIVERY TO MAINLAND UK ONLY

For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.

Colour: Basalt

About the product

Nexus ProJoint Fusion

Looking for an all weather paving jointing compound?

For a quick and easy solution to filling joints between paving slabs and setts, and for one that is suitable for natural stone and concrete paving ProJoint Fusion is really simple to use, and DIY friendly, it allows even those that haven't grouted a patio before to consistently deliver perfect joints every time - whatever the weather!

ProJoint Fusion delivers a weed free, frost resistant joint, without staining the paving - saving you time, money and the need to come back and do the job again in another year!

Packaged in a vacuum packed pouch within a 15kg tub with lid colours that denote the product colour - ProJoint Fusion is available in four colours to suit whatever concrete, porcelain or natural stone paving slabs you have on your patio: neutral (buff), mid grey, basalt and black.

Technical information

  • Contractor-sized 15kg tubs
  • Suitable for use in wet weather
  • Professional strength
  • Pre-mixed, ready to use
  • Cement free and non hazardous
  • Suitable for pedestrian traffic: ideal for paths and patios
  • Perfect for DIY use
  • Suitable for natural stone and concrete paving, setts and slabs

ProJoint Fusion is a very quick and easy paving joint filler designed for paving, patios and larger paved areas.

Download the technical datasheet

Preparation

Ensure the surface of the paving is clean prior to application. Check the joints are cleaned out to a depth of 25mm ensuring a minimum joint width of 3mm, and that the paving is firmly bedded and stable prior to filling joints. Paving should be laid on a permeable bedding mix as Fusion cures when it dries out so water/rain must have a route of escape.

Application

Apply Fusion when surface temperature is above 0°C. Liberally soak the paving first and then empty the mix evenly onto the surface and work quickly into the joints using a brush or squeegee. Mist the surface and compound with a soft spray of water to flush the material down into the joints. Top up any low joints and repeat as necessary. Once the water has drained away then sweep the paving with a fresh soft brush at 45° to the joints, and remove any excess. A trowel or iron can be used to achieve a traditional finish if required.

The product can be used in light rain but prolonged and heavy rain will delay the curing process and increase the risk of fluid damage. ProJoint Fusion is not recommended for porcelain - please refer to ProJoint Porcelain products. ProJoint Fusion may highlight and enhance the natural surface colours and textures of the paving - this can be especially noticeable on grey paving, including granite, so a test area is advised before use. It is important to spread the mix across the total paving area to ensure the potential effect is uniform. Please note that this is a temporary effect and weathering and foot traffic accelerate its disappearance. For extra porous paving or to minimise any effect use V35-UV™.

Coverage

Based on average 600 x 600 mm slabs

  • Joint size 5 x 25mm: 20m2
  • Joint size 10 x 25mm: 10m2
  • Joint size 15 x 25mm: 6.67m2
  • Brand: Nexus
  • SKU: TPE-NXFUSBAS15KG
  • Weight: 15.0 kg / 33.07 lb

Delivery & Returns Info

Our delivery charges are calculated based on the size and weight of your order. When you add items to your basket, the delivery charges are displayed. Small orders are distributed via courier; larger orders via Pallet Network. Collection is available from our Tamworth depot by request (contact us first to arrange on 0330 122 1025).

Please note, there is a slight surcharge for areas that are outside of our locality, charges calculated at checkout.

Weight and size Next Working Day*
Order before 1PM (excl. VAT)
Standard 3-5 Working Day
(excl. VAT)
0-13KG
(1 small bag/tub)
£14.00 £9.00
13.01-25KG
(1 large bag/tub)
£16.00 £10.00
25.01-50KG
(2 bags/tubs)
£26.00 £19.00
50.01-75KG
(3 bags/tubs)
£36.00 £28.00
75.01-100KG
(4-5 bags/tubs)
£46.00 £37.00
100.01-249KG
(6-9 bags/tubs)
£60.00 £45.00
249.01-750KG
(10 bags plus)
£68.00 £48.00
750.01KG plus
(30 bags plus)
£75.00 £55.00
Full Pallets
(56 bags/52 tubs)
£88.00 Free of charge
Next Working Day delivery (Premium 1-2 Working Day Service) +avg. £5-10 Extra. Click here for prices
Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) Click here for prices
Local Delivery & Click & Collect: Email: orders@thepavingexperts.co.uk

Delivery Information

  • Prices apply to mainland England and Wales. Scottish delivery slight surcharge.
  • Orders are packed and dispatched Monday–Friday (excluding weekends & public holidays).

Next Working Day Delivery

  • Order before 1PM → same-day dispatch.
  • Order after 1PM or on weekends/bank holidays → next working day dispatch.
  • You'll receive tracking updates via email/SMS if you provide your details.

Delivery Examples

  • Mon before 1PM → Packed Mon, delivered Tue.
  • Mon after 1PM → Packed Tues delivered Wed.
  • Fri before 1PM → Packed Fri, delivered Mon.
  • Fri after 1PM/weekend → Packed Mon, delivered Tues (or Wed after a bank holiday).
  • Standard Service: 3–5 working days.

Notes

  • Occasional delays due to manufacturing, supply, or courier issues may happen, but we'll keep you informed.

Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for the cost of returning goods to The Paving Experts, 20% admin restock fee applies. Need further info, click here.

For further detailed delivery information click here →

For any advice; technical, product, stock or quantity needed, call our team on 0330 122 1025.

Please see our FAQs for more information.

Nexus ProJoint Fusion

Looking for an all weather paving jointing compound?

For a quick and easy solution to filling joints between paving slabs and setts, and for one that is suitable for natural stone and concrete paving ProJoint Fusion is really simple to use, and DIY friendly, it allows even those that haven't grouted a patio before to consistently deliver perfect joints every time - whatever the weather!

ProJoint Fusion delivers a weed free, frost resistant joint, without staining the paving - saving you time, money and the need to come back and do the job again in another year!

Packaged in a vacuum packed pouch within a 15kg tub with lid colours that denote the product colour - ProJoint Fusion is available in four colours to suit whatever concrete, porcelain or natural stone paving slabs you have on your patio: neutral (buff), mid grey, basalt and black.

Technical information

  • Contractor-sized 15kg tubs
  • Suitable for use in wet weather
  • Professional strength
  • Pre-mixed, ready to use
  • Cement free and non hazardous
  • Suitable for pedestrian traffic: ideal for paths and patios
  • Perfect for DIY use
  • Suitable for natural stone and concrete paving, setts and slabs

ProJoint Fusion is a very quick and easy paving joint filler designed for paving, patios and larger paved areas.

Download the technical datasheet

Preparation

Ensure the surface of the paving is clean prior to application. Check the joints are cleaned out to a depth of 25mm ensuring a minimum joint width of 3mm, and that the paving is firmly bedded and stable prior to filling joints. Paving should be laid on a permeable bedding mix as Fusion cures when it dries out so water/rain must have a route of escape.

Application

Apply Fusion when surface temperature is above 0°C. Liberally soak the paving first and then empty the mix evenly onto the surface and work quickly into the joints using a brush or squeegee. Mist the surface and compound with a soft spray of water to flush the material down into the joints. Top up any low joints and repeat as necessary. Once the water has drained away then sweep the paving with a fresh soft brush at 45° to the joints, and remove any excess. A trowel or iron can be used to achieve a traditional finish if required.

The product can be used in light rain but prolonged and heavy rain will delay the curing process and increase the risk of fluid damage. ProJoint Fusion is not recommended for porcelain - please refer to ProJoint Porcelain products. ProJoint Fusion may highlight and enhance the natural surface colours and textures of the paving - this can be especially noticeable on grey paving, including granite, so a test area is advised before use. It is important to spread the mix across the total paving area to ensure the potential effect is uniform. Please note that this is a temporary effect and weathering and foot traffic accelerate its disappearance. For extra porous paving or to minimise any effect use V35-UV™.

Coverage

Based on average 600 x 600 mm slabs

  • Joint size 5 x 25mm: 20m2
  • Joint size 10 x 25mm: 10m2
  • Joint size 15 x 25mm: 6.67m2

Nexus ProJoint Fusion

Looking for an all weather paving jointing compound?

For a quick and easy solution to filling joints between paving slabs and setts, and for one that is suitable for natural stone and concrete paving ProJoint Fusion is really simple to use, and DIY friendly, it allows even those that haven't grouted a patio before to consistently deliver perfect joints every time - whatever the weather!

ProJoint Fusion delivers a weed free, frost resistant joint, without staining the paving - saving you time, money and the need to come back and do the job again in another year!

Packaged in a vacuum packed pouch within a 15kg tub with lid colours that denote the product colour - ProJoint Fusion is available in four colours to suit whatever concrete, porcelain or natural stone paving slabs you have on your patio: neutral (buff), mid grey, basalt and black.

Technical information

  • Contractor-sized 15kg tubs
  • Suitable for use in wet weather
  • Professional strength
  • Pre-mixed, ready to use
  • Cement free and non hazardous
  • Suitable for pedestrian traffic: ideal for paths and patios
  • Perfect for DIY use
  • Suitable for natural stone and concrete paving, setts and slabs

ProJoint Fusion is a very quick and easy paving joint filler designed for paving, patios and larger paved areas.

Download the technical datasheet

Preparation

Ensure the surface of the paving is clean prior to application. Check the joints are cleaned out to a depth of 25mm ensuring a minimum joint width of 3mm, and that the paving is firmly bedded and stable prior to filling joints. Paving should be laid on a permeable bedding mix as Fusion cures when it dries out so water/rain must have a route of escape.

Application

Apply Fusion when surface temperature is above 0°C. Liberally soak the paving first and then empty the mix evenly onto the surface and work quickly into the joints using a brush or squeegee. Mist the surface and compound with a soft spray of water to flush the material down into the joints. Top up any low joints and repeat as necessary. Once the water has drained away then sweep the paving with a fresh soft brush at 45° to the joints, and remove any excess. A trowel or iron can be used to achieve a traditional finish if required.

The product can be used in light rain but prolonged and heavy rain will delay the curing process and increase the risk of fluid damage. ProJoint Fusion is not recommended for porcelain - please refer to ProJoint Porcelain products. ProJoint Fusion may highlight and enhance the natural surface colours and textures of the paving - this can be especially noticeable on grey paving, including granite, so a test area is advised before use. It is important to spread the mix across the total paving area to ensure the potential effect is uniform. Please note that this is a temporary effect and weathering and foot traffic accelerate its disappearance. For extra porous paving or to minimise any effect use V35-UV™.

Coverage

Based on average 600 x 600 mm slabs

  • Joint size 5 x 25mm: 20m2
  • Joint size 10 x 25mm: 10m2
  • Joint size 15 x 25mm: 6.67m2

No technical information available for this product.

Delivery & Returns Info

Our delivery charges are calculated based on the size and weight of your order. When you add items to your basket, the delivery charges are displayed. Small orders are distributed via courier; larger orders via Pallet Network. Collection is available from our Tamworth depot by request (contact us first to arrange on 0330 122 1025).

Please note, there is a slight surcharge for areas that are outside of our locality, charges calculated at checkout.

Weight and size Next Working Day*
Order before 1PM (excl. VAT)
Standard 3-5 Working Day
(excl. VAT)
0-13KG
(1 small bag/tub)
£14.00 £9.00
13.01-25KG
(1 large bag/tub)
£16.00 £10.00
25.01-50KG
(2 bags/tubs)
£26.00 £19.00
50.01-75KG
(3 bags/tubs)
£36.00 £28.00
75.01-100KG
(4-5 bags/tubs)
£46.00 £37.00
100.01-249KG
(6-9 bags/tubs)
£60.00 £45.00
249.01-750KG
(10 bags plus)
£68.00 £48.00
750.01KG plus
(30 bags plus)
£75.00 £55.00
Full Pallets
(56 bags/52 tubs)
£88.00 Free of charge
Next Working Day delivery (Premium 1-2 Working Day Service) +avg. £5-10 Extra. Click here for prices
Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) Click here for prices
Local Delivery & Click & Collect: Email: orders@thepavingexperts.co.uk

Delivery Information

  • Prices apply to mainland England and Wales. Scottish delivery slight surcharge.
  • Orders are packed and dispatched Monday–Friday (excluding weekends & public holidays).

Next Working Day Delivery

  • Order before 1PM → same-day dispatch.
  • Order after 1PM or on weekends/bank holidays → next working day dispatch.
  • You'll receive tracking updates via email/SMS if you provide your details.

Delivery Examples

  • Mon before 1PM → Packed Mon, delivered Tue.
  • Mon after 1PM → Packed Tues delivered Wed.
  • Fri before 1PM → Packed Fri, delivered Mon.
  • Fri after 1PM/weekend → Packed Mon, delivered Tues (or Wed after a bank holiday).
  • Standard Service: 3–5 working days.

Notes

  • Occasional delays due to manufacturing, supply, or courier issues may happen, but we'll keep you informed.

Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for the cost of returning goods to The Paving Experts, 20% admin restock fee applies. Need further info, click here.

For further detailed delivery information click here →

No mixing & application information available for this product.

A brush-in jointing compound is a sand-based, permeable paving grout that is applied directly into the joints using a brush. It is ideal for patios, walkways, and seamless transitions between indoor and outdoor paving. Examples of high-spec brush-in jointing compounds include Ultrascape Premjoint, Nexus ProJoint Fusion, Nexus Polysweep (for block paving), EasyJoint, EasyJoint Pro, Joint-It Simple, Joint-It Elite, and Joint-It RapidFlow, all designed to create durable, long-lasting, and visually neat joints.