Ultracrete Instaband Eco Thermoplastic Overbanding Tape (Box of 12). FREE DELIVERY 🚚
About the product
Instaband ECO is a thermoplastic bitumen over-banding tape for application around the edges of pothole repairs to prevent water ingress. HAPAS Approved in 2012, it’s ideal for use with Instant Road Repair, Permanent Pothole Repair & Ultracrete SCJ Cold Joint Spray.
Thermoplastic over-banding Tape (Box of 12) – Roll size, 5m x 35mm. FREE DELIVERY 🚚
Got a question about Instaband ECO? Download the technical datasheet (pdf) or see the pothole repair FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. Or alternatively, call ☎️ 0330 122 1025 – we’re a small team, but happy to help. 😊✨
Calculate required quantity
Ultracrete Instaband Eco Thermoplastic Overbanding Tape (Box of 12). FREE DELIVERY 🚚
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
How much you will need?
Instaband ECO technical information
| Size | 5 metres (each roll) |
| Width & depth | 35mm x 3mm |
| Quantity | 12 rolls |
How to apply Instaband Eco
- Preheat the surface making sure it is completely free from moisture.
- Remove Instaband ECO from its protective wrapping and roll out on to the road surface, beaded side up.
- Once in place, heat the Instaband ECO with a propane torch. The heat should be applied from a distance of approximately 200-400mm (8”-16”) from the material. Heat in a slow even sweeping motion making sure you do not spot-heat any area, as this may scorch the material causing discolouration.
- Instaband ECO® must be heated until the material starts to bubble and melt.
- Depending on air temperature, Instaband ECO will cool down and harden within 5-10 minutes of installation. When this has occured, check for correct installation by trying to lift parts of the material at the edges using a knife or a chisel. If this can be lifted, simply reapply heat until adequate bonding has occured.
About the product
Instaband ECO is a thermoplastic bitumen over-banding tape for application around the edges of pothole repairs to prevent water ingress. HAPAS Approved in 2012, it’s ideal for use with Instant Road Repair, Permanent Pothole Repair & Ultracrete SCJ Cold Joint Spray.
Thermoplastic over-banding Tape (Box of 12) – Roll size, 5m x 35mm. FREE DELIVERY 🚚
Got a question about Instaband ECO? Download the technical datasheet (pdf) or see the pothole repair FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. Or alternatively, call ☎️ 0330 122 1025 – we’re a small team, but happy to help. 😊✨
Instaband ECO: Thermoplastic Overbanding Tape (Box of 12). FREE DELIVERY 🚚
Instaband ECO is a thermoplastic over-banding tape which has been designed for application around pothole repairs, to prevent water ingress and progressive fretting. It has been HAPAS Approved since 2012 and prevents water ingress immediately, prolonging the life of your repair. It is ideal for use as a complete system, with SCJ Cold Joint Spray, Instant Road Repair, and Permanent Pothole Repair - PPR.
- Quick and easy to apply
- Fast installation
- Open to traffic: 10 minutes
- Elastic qualities accommodate thermal movement
- 60 SRV
- No waste – cut as required
- The Premier tarmac jointing tape
- Designed for preventing water ingress and progressive fretting
- Prevents water ingress immediately after application.
- NBS Plus registered for ease of specification
- This pack is a box of 12 rolls
What is Thermoplastic Overbanding Tape?
Thermoplastic bitumen overbanding tape, is a bituminous tape that provides an instant seal when applied over cracked asphalt or failed reinstatement joints on road surfaces. For use with pothole repair such as IRR 6 & 10mm, PPR and SCJ-750 Cold Joint Spray.
How to apply Instaband Eco Thermoplastic Overbanding Tape
- Preheat the surface making sure it is completely free from moisture.
- Remove Instaband ECO from its protective wrapping and roll out on to the road surface, beaded side up.
- Once in place, heat the Instaband ECO with a propane torch. The heat should be applied from a distance of approximately 200-400mm (8”-16”) from the material. Heat in a slow even sweeping motion making sure you do not spot-heat any area, as this may scorch the material causing discolouration.
- Instaband ECO® must be heated until the material starts to bubble and melt.
- Depending on air temperature, Instaband ECO will cool down and harden within 5-10 minutes of installation. When this has occurred, check for correct installation by trying to lift parts of the material at the edges using a knife or a chisel. If this can be lifted, simply reapply heat until adequate bonding has occurred.
- Brand: Instarmac
- SKU: TPE-INSTBNDX12
- Weight: 2.0 kg / 4.41 lb
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
For any advice; technical, product, stock or quantity needed, call our team on 0330 122 1025.
Please see our FAQs for more information.
Instaband ECO: Thermoplastic Overbanding Tape (Box of 12). FREE DELIVERY 🚚
Instaband ECO is a thermoplastic over-banding tape which has been designed for application around pothole repairs, to prevent water ingress and progressive fretting. It has been HAPAS Approved since 2012 and prevents water ingress immediately, prolonging the life of your repair. It is ideal for use as a complete system, with SCJ Cold Joint Spray, Instant Road Repair, and Permanent Pothole Repair - PPR.
- Quick and easy to apply
- Fast installation
- Open to traffic: 10 minutes
- Elastic qualities accommodate thermal movement
- 60 SRV
- No waste – cut as required
- The Premier tarmac jointing tape
- Designed for preventing water ingress and progressive fretting
- Prevents water ingress immediately after application.
- NBS Plus registered for ease of specification
- This pack is a box of 12 rolls
What is Thermoplastic Overbanding Tape?
Thermoplastic bitumen overbanding tape, is a bituminous tape that provides an instant seal when applied over cracked asphalt or failed reinstatement joints on road surfaces. For use with pothole repair such as IRR 6 & 10mm, PPR and SCJ-750 Cold Joint Spray.
How to apply Instaband Eco Thermoplastic Overbanding Tape
- Preheat the surface making sure it is completely free from moisture.
- Remove Instaband ECO from its protective wrapping and roll out on to the road surface, beaded side up.
- Once in place, heat the Instaband ECO with a propane torch. The heat should be applied from a distance of approximately 200-400mm (8”-16”) from the material. Heat in a slow even sweeping motion making sure you do not spot-heat any area, as this may scorch the material causing discolouration.
- Instaband ECO® must be heated until the material starts to bubble and melt.
- Depending on air temperature, Instaband ECO will cool down and harden within 5-10 minutes of installation. When this has occurred, check for correct installation by trying to lift parts of the material at the edges using a knife or a chisel. If this can be lifted, simply reapply heat until adequate bonding has occurred.
Instaband ECO technical information
| Size | 5 metres (each roll) |
| Width & depth | 35mm x 3mm |
| Quantity | 12 rolls |
How to apply Instaband Eco
- Preheat the surface making sure it is completely free from moisture.
- Remove Instaband ECO from its protective wrapping and roll out on to the road surface, beaded side up.
- Once in place, heat the Instaband ECO with a propane torch. The heat should be applied from a distance of approximately 200-400mm (8”-16”) from the material. Heat in a slow even sweeping motion making sure you do not spot-heat any area, as this may scorch the material causing discolouration.
- Instaband ECO® must be heated until the material starts to bubble and melt.
- Depending on air temperature, Instaband ECO will cool down and harden within 5-10 minutes of installation. When this has occured, check for correct installation by trying to lift parts of the material at the edges using a knife or a chisel. If this can be lifted, simply reapply heat until adequate bonding has occured.
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
Instaband ECO: Thermoplastic Overbanding Tape (Box of 12). FREE DELIVERY 🚚
Instaband ECO is a thermoplastic over-banding tape which has been designed for application around pothole repairs, to prevent water ingress and progressive fretting. It has been HAPAS Approved since 2012 and prevents water ingress immediately, prolonging the life of your repair. It is ideal for use as a complete system, with SCJ Cold Joint Spray, Instant Road Repair, and Permanent Pothole Repair - PPR.
- Quick and easy to apply
- Fast installation
- Open to traffic: 10 minutes
- Elastic qualities accommodate thermal movement
- 60 SRV
- No waste – cut as required
- The Premier tarmac jointing tape
- Designed for preventing water ingress and progressive fretting
- Prevents water ingress immediately after application.
- NBS Plus registered for ease of specification
- This pack is a box of 12 rolls
What is Thermoplastic Overbanding Tape?
Thermoplastic bitumen overbanding tape, is a bituminous tape that provides an instant seal when applied over cracked asphalt or failed reinstatement joints on road surfaces. For use with pothole repair such as IRR 6 & 10mm, PPR and SCJ-750 Cold Joint Spray.
How to apply Instaband Eco Thermoplastic Overbanding Tape
- Preheat the surface making sure it is completely free from moisture.
- Remove Instaband ECO from its protective wrapping and roll out on to the road surface, beaded side up.
- Once in place, heat the Instaband ECO with a propane torch. The heat should be applied from a distance of approximately 200-400mm (8”-16”) from the material. Heat in a slow even sweeping motion making sure you do not spot-heat any area, as this may scorch the material causing discolouration.
- Instaband ECO® must be heated until the material starts to bubble and melt.
- Depending on air temperature, Instaband ECO will cool down and harden within 5-10 minutes of installation. When this has occurred, check for correct installation by trying to lift parts of the material at the edges using a knife or a chisel. If this can be lifted, simply reapply heat until adequate bonding has occurred.
Instaband ECO technical information
| Size | 5 metres (each roll) |
| Width & depth | 35mm x 3mm |
| Quantity | 12 rolls |
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
How to apply Instaband Eco
- Preheat the surface making sure it is completely free from moisture.
- Remove Instaband ECO from its protective wrapping and roll out on to the road surface, beaded side up.
- Once in place, heat the Instaband ECO with a propane torch. The heat should be applied from a distance of approximately 200-400mm (8”-16”) from the material. Heat in a slow even sweeping motion making sure you do not spot-heat any area, as this may scorch the material causing discolouration.
- Instaband ECO® must be heated until the material starts to bubble and melt.
- Depending on air temperature, Instaband ECO will cool down and harden within 5-10 minutes of installation. When this has occured, check for correct installation by trying to lift parts of the material at the edges using a knife or a chisel. If this can be lifted, simply reapply heat until adequate bonding has occured.