UltraCrete QC10 (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
About the product
UltraCrete QC10 is a rapid strength, fast set concrete designed for thick section repairs, haunching reinstatements, ironwork backfilling & large commercial signs & post installation. It can be open to traffic in just 2 hours!
UltraCrete QC10: Rapid Strength Concrete (Pallet Offer 56x 25Kg Bags) Includes Free Delivery 🚚
Got a question about QC10? Download the technical datasheet (pdf) or see our comprehensive FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. We’re a small team, but happy to help. 
Calculate required quantity
UltraCrete QC10 (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
Standard 3-5 day free delivery on pallets applies to England only. For all other regions please call for a quote.
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
Standard 3-5 day free delivery on pallets applies to England only. For all other regions please call for a quote.
How much you will need?
Technical information
- Workability: 5 – 10 minutes
- Set time: 10 – 20 minutes
- Depth: 30mm – 250mm
- 20N/mm² compressive strength in 2 hours
- Size: 25kg bag
- Cleaning: QC10 should be removed from tools and equipment with clean water immediately after use. Cured material can also be removed mechanically.
- Storage: Store in closed original packaging at temperatures between 5°C and 30°C. Avoid frost.
How to prepare surfaces for QC10
All surfaces should be free from oil, grease, dust or any other visible contaminants before application.- Remove all loose particles and work on a sound substrate.
- Pre-soak the area with clean water prior to application to aid bond.
- Remove ponded water before applying the product).
How to mix QC10 Rapid Strength Concrete
- QC10 can be mixed mechanically or by hand.
- If by hand, ensure that the mixing is vigorous.
- Mix the inner bag containing the cement with the sand/aggregate.
- Add approximately 1 litre of water and mix thoroughly.
- Then, if required, add sufficient additional water until the required consistency is achieved to a maximum of 2 litres.
How to apply QC10 Rapid Strength Concrete
In conjunction with the HAPAS Approved UltraCrete Manhole Reinstatement System:- QC10 should be applied with a float 40mm below the required surface, then compacted to ensure no voids are evident. The final surface should be rough floated to achieve a level surface.
- Once the material has reached an initial set all vertical edges of the reinstatement, including the ironwork, should be sprayed with UltraCrete SCJ. This will prevent the ingress of water into the reinstatement.
- Ensure all vertical substrates are fully covered.
- Apply material over pre-soaked area within 4 minutes of mixing.
- Firm well into position by tamping or using a float.
- Clean any mixing equipment with water immediately after use.
About the product
UltraCrete QC10 is a rapid strength, fast set concrete designed for thick section repairs, haunching reinstatements, ironwork backfilling & large commercial signs & post installation. It can be open to traffic in just 2 hours!
UltraCrete QC10: Rapid Strength Concrete (Pallet Offer 56x 25Kg Bags) Includes Free Delivery 🚚
Got a question about QC10? Download the technical datasheet (pdf) or see our comprehensive FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. We’re a small team, but happy to help.
UltraCrete QC10 Rapid Strength Concrete (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
QC10 is a rapid setting, high strength concrete that has been specifically designed for thick section repairs, haunching reinstatements, ironwork backfilling and commercial sign and post installation. It has been HAPAS approved since 2005 and can be opened to traffic in just 2 hours.
Features and benefits of QC10
- Contains special cements and graded aggregate
- Simply add water on site to form a high strength concrete
- Suitable for applications from 30mm – 250mm in one pass
- Can be bulked out in certain applications (may affect performance)
- Approved for use on the London Underground and Overground
- NBS Plus registered for ease of specification
- Pallet Offer: 56 x 25kg reinforced paper bags
- Brand: Instarmac
- SKU: TPE-PALQC10BAG
- Weight: 1000.0 kg / 2204.62 lb
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
For any advice; technical, product, stock or quantity needed, call our team on 0330 122 1025.
Please see our FAQs for more information.
UltraCrete QC10 Rapid Strength Concrete (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
QC10 is a rapid setting, high strength concrete that has been specifically designed for thick section repairs, haunching reinstatements, ironwork backfilling and commercial sign and post installation. It has been HAPAS approved since 2005 and can be opened to traffic in just 2 hours.
Features and benefits of QC10
- Contains special cements and graded aggregate
- Simply add water on site to form a high strength concrete
- Suitable for applications from 30mm – 250mm in one pass
- Can be bulked out in certain applications (may affect performance)
- Approved for use on the London Underground and Overground
- NBS Plus registered for ease of specification
- Pallet Offer: 56 x 25kg reinforced paper bags
Technical information
- Workability: 5 – 10 minutes
- Set time: 10 – 20 minutes
- Depth: 30mm – 250mm
- 20N/mm² compressive strength in 2 hours
- Size: 25kg bag
- Cleaning: QC10 should be removed from tools and equipment with clean water immediately after use. Cured material can also be removed mechanically.
- Storage: Store in closed original packaging at temperatures between 5°C and 30°C. Avoid frost.
How to prepare surfaces for QC10
All surfaces should be free from oil, grease, dust or any other visible contaminants before application.- Remove all loose particles and work on a sound substrate.
- Pre-soak the area with clean water prior to application to aid bond.
- Remove ponded water before applying the product).
How to mix QC10 Rapid Strength Concrete
- QC10 can be mixed mechanically or by hand.
- If by hand, ensure that the mixing is vigorous.
- Mix the inner bag containing the cement with the sand/aggregate.
- Add approximately 1 litre of water and mix thoroughly.
- Then, if required, add sufficient additional water until the required consistency is achieved to a maximum of 2 litres.
How to apply QC10 Rapid Strength Concrete
In conjunction with the HAPAS Approved UltraCrete Manhole Reinstatement System:- QC10 should be applied with a float 40mm below the required surface, then compacted to ensure no voids are evident. The final surface should be rough floated to achieve a level surface.
- Once the material has reached an initial set all vertical edges of the reinstatement, including the ironwork, should be sprayed with UltraCrete SCJ. This will prevent the ingress of water into the reinstatement.
- Ensure all vertical substrates are fully covered.
- Apply material over pre-soaked area within 4 minutes of mixing.
- Firm well into position by tamping or using a float.
- Clean any mixing equipment with water immediately after use.
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
UltraCrete QC10 Rapid Strength Concrete (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
QC10 is a rapid setting, high strength concrete that has been specifically designed for thick section repairs, haunching reinstatements, ironwork backfilling and commercial sign and post installation. It has been HAPAS approved since 2005 and can be opened to traffic in just 2 hours.
Features and benefits of QC10
- Contains special cements and graded aggregate
- Simply add water on site to form a high strength concrete
- Suitable for applications from 30mm – 250mm in one pass
- Can be bulked out in certain applications (may affect performance)
- Approved for use on the London Underground and Overground
- NBS Plus registered for ease of specification
- Pallet Offer: 56 x 25kg reinforced paper bags
Technical information
- Workability: 5 – 10 minutes
- Set time: 10 – 20 minutes
- Depth: 30mm – 250mm
- 20N/mm² compressive strength in 2 hours
- Size: 25kg bag
- Cleaning: QC10 should be removed from tools and equipment with clean water immediately after use. Cured material can also be removed mechanically.
- Storage: Store in closed original packaging at temperatures between 5°C and 30°C. Avoid frost.
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
How to prepare surfaces for QC10
All surfaces should be free from oil, grease, dust or any other visible contaminants before application.- Remove all loose particles and work on a sound substrate.
- Pre-soak the area with clean water prior to application to aid bond.
- Remove ponded water before applying the product).
How to mix QC10 Rapid Strength Concrete
- QC10 can be mixed mechanically or by hand.
- If by hand, ensure that the mixing is vigorous.
- Mix the inner bag containing the cement with the sand/aggregate.
- Add approximately 1 litre of water and mix thoroughly.
- Then, if required, add sufficient additional water until the required consistency is achieved to a maximum of 2 litres.
How to apply QC10 Rapid Strength Concrete
In conjunction with the HAPAS Approved UltraCrete Manhole Reinstatement System:- QC10 should be applied with a float 40mm below the required surface, then compacted to ensure no voids are evident. The final surface should be rough floated to achieve a level surface.
- Once the material has reached an initial set all vertical edges of the reinstatement, including the ironwork, should be sprayed with UltraCrete SCJ. This will prevent the ingress of water into the reinstatement.
- Ensure all vertical substrates are fully covered.
- Apply material over pre-soaked area within 4 minutes of mixing.
- Firm well into position by tamping or using a float.
- Clean any mixing equipment with water immediately after use.