UltraCrete QC10F (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
About the product
Looking for a trade deal on a rapid set, flowable concrete?
Ultracrete QC10 F is a super rapid set, shrinkage compensated, fibre modified concrete to backfill manhole frames & gullies, surface cracks & repairs. QC10 F sets in just 20 minutes and can be opened to traffic in 90 minutes. QC10 F is workable between 5 – 10 minutes, sets in 10 – 20 minutes and can reach depths from 30mm to 500mm!
UltraCrete QC10 F: Rapid Set Flowable Concrete (Pallet Offer 56x 25Kg Bags) Free Delivery 🚚
Got a question about QC10 F? Download the technical datasheet (pdf) or see our comprehensive FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. We’re a small team, but happy to help. 
We offer the cheapest products online, if you find QC10 F anywhere cheaper please get in touch!
Calculate required quantity
UltraCrete QC10F (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
Standard 3-5 day free delivery on pallets applies to England only. For all other regions please call for a quote.
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
Standard 3-5 day free delivery on pallets applies to England only. For all other regions please call for a quote.
How much you will need?
Technical information
- Workability: 5 – 10 minutes
- Set time: 10 – 20 minutes
- Depth: 30mm – 500mm
- 20N/mm² compressive strength after 90 minutes
- Ideally do not use when temperatures are below 0°C or above 30°C. For use in temperatures outside this range please contact us for advice.
How to prepare surfaces for QC10 F
All surfaces should be free from oil, grease, dust or any other visible contaminants.- Remove all loose particles and work on a sound substrate.
- Pre-soak the area with clean water prior to application to aid bond.
- Remove ponded water before applying the product. Good concrete practice should always be observed to enable the mix to be placed into position within 4 minutes.
How to mix QC10 F Rapid Set Flowable Concrete
- Can be mixed mechanically or by hand.
- If by hand, ensure that the mixing is vigorous.
- Mix the inner bag containing the cement with the sand/aggregate.
- Formulated to be mixed to a smooth flowable consistency.
- It is advisable to add a maximum of 2 litres of water initially, mix and if required, add up to a further 0.25 litres.
- It is essential that this product not be over-watered. The addition of excessive water will result in slower strength gain, reduced final compressive strength and the possibility of shrinkage cracking.
- Sand/aggregate contains moisture and the volume of water required will vary depending on the moisture content of the aggregate.
- Mix only enough material to apply within 4 minutes.
- Never remix or add water.
- If the product needs to be applied to walls then the water content can be reduced to obtain a stiffer consistency.
How to apply QC10 F Rapid Set Flowable Concrete
- Pour mixed QC10 F into place (if required lightly trowel to ensure good contact with edges), 60mm below the required surface.
- Once the material has reached an initial set, all horizontal surfaces of the reinstatement, including the ironwork, should be sprayed with Ultracrete SCJ. This will prevent the ingress of water into the reinstatement and promote a good bond. Ensure all vertical substrates are fully covered.
- Clean any mixing equipment with water immediately after use.
About the product
Looking for a trade deal on a rapid set, flowable concrete?
Ultracrete QC10 F is a super rapid set, shrinkage compensated, fibre modified concrete to backfill manhole frames & gullies, surface cracks & repairs. QC10 F sets in just 20 minutes and can be opened to traffic in 90 minutes. QC10 F is workable between 5 – 10 minutes, sets in 10 – 20 minutes and can reach depths from 30mm to 500mm!
UltraCrete QC10 F: Rapid Set Flowable Concrete (Pallet Offer 56x 25Kg Bags) Free Delivery 🚚
Got a question about QC10 F? Download the technical datasheet (pdf) or see our comprehensive FAQs. Otherwise get in touch and we’ll get back to you by email or phone as soon as we can. We’re a small team, but happy to help.
We offer the cheapest products online, if you find QC10 F anywhere cheaper please get in touch!
UltraCrete QC10 F: Rapid Set Flowable Concrete (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
If you need a rapid set, flowable concrete to backfill around manhole frames, gullies, surface cracks or repairs, but need a bulk order for a large scale project, look no further than our Pallet Deal of 56 x 25KG bags of Ultracrete QC10 F.
Features and benefits of QC10 F
- Contains special cements and graded aggregate
- Simply add water on site to form a high strength concrete
- Suitable for applications from 30mm - 500mm in one pass.
- Shrinkage compensated
- Approved for use on the London Underground and Overground
- Size: 25kg plastic bag
- Pallet Offer: 56 x 25kg bags
- NBS Plus registered for ease of specification
Download the QC10 F technical datasheet (pdf)
Please note that patching and surface repairs will require the use of Ultrascape Pro Prime Slurry Primer prior to product application. Please click the link if you'd like to add any bags of Pro Prime to your order! Thank you.
- Brand: Instarmac
- SKU: TPE-PALQC10FBAG
- Weight: 1000.0 kg / 2204.62 lb
Delivery & Returns Info
Our delivery charges are calculated based on the size and weight of your order. When you add items to your basket, the delivery charges are displayed. Small orders are distributed via courier; larger orders via Pallet Network. Collection is available from our Tamworth depot by request (contact us first to arrange on 0330 122 1025).
Please note, there is a slight surcharge for areas that are outside of our locality, charges calculated at checkout.
| Weight and size | Next Working Day* Order before 1PM (excl. VAT) |
Standard 3-5 Working Day (excl. VAT) |
|---|---|---|
| 0-13KG (1 small bag/tub) |
£14.00 | £9.00 |
| 13.01-25KG (1 large bag/tub) |
£16.00 | £10.00 |
| 25.01-50KG (2 bags/tubs) |
£26.00 | £19.00 |
| 50.01-75KG (3 bags/tubs) |
£36.00 | £28.00 |
| 75.01-100KG (4-5 bags/tubs) |
£46.00 | £37.00 |
| 100.01-249KG (6-9 bags/tubs) |
£60.00 | £45.00 |
| 249.01-750KG (10 bags plus) |
£68.00 | £48.00 |
| 750.01KG plus (30 bags plus) |
£75.00 | £55.00 |
| Full Pallets (56 bags/52 tubs) |
£88.00 | Free of charge |
| Next Working Day delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
Delivery Information
- Prices apply to mainland England and Wales. Scottish delivery slight surcharge.
- Orders are packed and dispatched Monday–Friday (excluding weekends & public holidays).
Next Working Day Delivery
- Order before 1PM → same-day dispatch.
- Order after 1PM or on weekends/bank holidays → next working day dispatch.
- You'll receive tracking updates via email/SMS if you provide your details.
Delivery Examples
- Mon before 1PM → Packed Mon, delivered Tue.
- Mon after 1PM → Packed Tues delivered Wed.
- Fri before 1PM → Packed Fri, delivered Mon.
- Fri after 1PM/weekend → Packed Mon, delivered Tues (or Wed after a bank holiday).
- Standard Service: 3–5 working days.
Notes
- Occasional delays due to manufacturing, supply, or courier issues may happen, but we'll keep you informed.
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for the cost of returning goods to The Paving Experts, 20% admin restock fee applies. Need further info, click here.
For further detailed delivery information click here →
For any advice; technical, product, stock or quantity needed, call our team on 0330 122 1025.
Please see our FAQs for more information.
UltraCrete QC10 F: Rapid Set Flowable Concrete (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
If you need a rapid set, flowable concrete to backfill around manhole frames, gullies, surface cracks or repairs, but need a bulk order for a large scale project, look no further than our Pallet Deal of 56 x 25KG bags of Ultracrete QC10 F.
Features and benefits of QC10 F
- Contains special cements and graded aggregate
- Simply add water on site to form a high strength concrete
- Suitable for applications from 30mm - 500mm in one pass.
- Shrinkage compensated
- Approved for use on the London Underground and Overground
- Size: 25kg plastic bag
- Pallet Offer: 56 x 25kg bags
- NBS Plus registered for ease of specification
Download the QC10 F technical datasheet (pdf)
Please note that patching and surface repairs will require the use of Ultrascape Pro Prime Slurry Primer prior to product application. Please click the link if you'd like to add any bags of Pro Prime to your order! Thank you.
Technical information
- Workability: 5 – 10 minutes
- Set time: 10 – 20 minutes
- Depth: 30mm – 500mm
- 20N/mm² compressive strength after 90 minutes
- Ideally do not use when temperatures are below 0°C or above 30°C. For use in temperatures outside this range please contact us for advice.
How to prepare surfaces for QC10 F
All surfaces should be free from oil, grease, dust or any other visible contaminants.- Remove all loose particles and work on a sound substrate.
- Pre-soak the area with clean water prior to application to aid bond.
- Remove ponded water before applying the product. Good concrete practice should always be observed to enable the mix to be placed into position within 4 minutes.
How to mix QC10 F Rapid Set Flowable Concrete
- Can be mixed mechanically or by hand.
- If by hand, ensure that the mixing is vigorous.
- Mix the inner bag containing the cement with the sand/aggregate.
- Formulated to be mixed to a smooth flowable consistency.
- It is advisable to add a maximum of 2 litres of water initially, mix and if required, add up to a further 0.25 litres.
- It is essential that this product not be over-watered. The addition of excessive water will result in slower strength gain, reduced final compressive strength and the possibility of shrinkage cracking.
- Sand/aggregate contains moisture and the volume of water required will vary depending on the moisture content of the aggregate.
- Mix only enough material to apply within 4 minutes.
- Never remix or add water.
- If the product needs to be applied to walls then the water content can be reduced to obtain a stiffer consistency.
How to apply QC10 F Rapid Set Flowable Concrete
- Pour mixed QC10 F into place (if required lightly trowel to ensure good contact with edges), 60mm below the required surface.
- Once the material has reached an initial set, all horizontal surfaces of the reinstatement, including the ironwork, should be sprayed with Ultracrete SCJ. This will prevent the ingress of water into the reinstatement and promote a good bond. Ensure all vertical substrates are fully covered.
- Clean any mixing equipment with water immediately after use.
Delivery & Returns Info
Our delivery charges are calculated based on the size and weight of your order. When you add items to your basket, the delivery charges are displayed. Small orders are distributed via courier; larger orders via Pallet Network. Collection is available from our Tamworth depot by request (contact us first to arrange on 0330 122 1025).
Please note, there is a slight surcharge for areas that are outside of our locality, charges calculated at checkout.
| Weight and size | Next Working Day* Order before 1PM (excl. VAT) |
Standard 3-5 Working Day (excl. VAT) |
|---|---|---|
| 0-13KG (1 small bag/tub) |
£14.00 | £9.00 |
| 13.01-25KG (1 large bag/tub) |
£16.00 | £10.00 |
| 25.01-50KG (2 bags/tubs) |
£26.00 | £19.00 |
| 50.01-75KG (3 bags/tubs) |
£36.00 | £28.00 |
| 75.01-100KG (4-5 bags/tubs) |
£46.00 | £37.00 |
| 100.01-249KG (6-9 bags/tubs) |
£60.00 | £45.00 |
| 249.01-750KG (10 bags plus) |
£68.00 | £48.00 |
| 750.01KG plus (30 bags plus) |
£75.00 | £55.00 |
| Full Pallets (56 bags/52 tubs) |
£88.00 | Free of charge |
| Next Working Day delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
Delivery Information
- Prices apply to mainland England and Wales. Scottish delivery slight surcharge.
- Orders are packed and dispatched Monday–Friday (excluding weekends & public holidays).
Next Working Day Delivery
- Order before 1PM → same-day dispatch.
- Order after 1PM or on weekends/bank holidays → next working day dispatch.
- You'll receive tracking updates via email/SMS if you provide your details.
Delivery Examples
- Mon before 1PM → Packed Mon, delivered Tue.
- Mon after 1PM → Packed Tues delivered Wed.
- Fri before 1PM → Packed Fri, delivered Mon.
- Fri after 1PM/weekend → Packed Mon, delivered Tues (or Wed after a bank holiday).
- Standard Service: 3–5 working days.
Notes
- Occasional delays due to manufacturing, supply, or courier issues may happen, but we'll keep you informed.
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for the cost of returning goods to The Paving Experts, 20% admin restock fee applies. Need further info, click here.
For further detailed delivery information click here →
UltraCrete QC10 F: Rapid Set Flowable Concrete (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚
If you need a rapid set, flowable concrete to backfill around manhole frames, gullies, surface cracks or repairs, but need a bulk order for a large scale project, look no further than our Pallet Deal of 56 x 25KG bags of Ultracrete QC10 F.
Features and benefits of QC10 F
- Contains special cements and graded aggregate
- Simply add water on site to form a high strength concrete
- Suitable for applications from 30mm - 500mm in one pass.
- Shrinkage compensated
- Approved for use on the London Underground and Overground
- Size: 25kg plastic bag
- Pallet Offer: 56 x 25kg bags
- NBS Plus registered for ease of specification
Download the QC10 F technical datasheet (pdf)
Please note that patching and surface repairs will require the use of Ultrascape Pro Prime Slurry Primer prior to product application. Please click the link if you'd like to add any bags of Pro Prime to your order! Thank you.
Technical information
- Workability: 5 – 10 minutes
- Set time: 10 – 20 minutes
- Depth: 30mm – 500mm
- 20N/mm² compressive strength after 90 minutes
- Ideally do not use when temperatures are below 0°C or above 30°C. For use in temperatures outside this range please contact us for advice.
Delivery & Returns Info
Our delivery charges are calculated based on the size and weight of your order. When you add items to your basket, the delivery charges are displayed. Small orders are distributed via courier; larger orders via Pallet Network. Collection is available from our Tamworth depot by request (contact us first to arrange on 0330 122 1025).
Please note, there is a slight surcharge for areas that are outside of our locality, charges calculated at checkout.
| Weight and size | Next Working Day* Order before 1PM (excl. VAT) |
Standard 3-5 Working Day (excl. VAT) |
|---|---|---|
| 0-13KG (1 small bag/tub) |
£14.00 | £9.00 |
| 13.01-25KG (1 large bag/tub) |
£16.00 | £10.00 |
| 25.01-50KG (2 bags/tubs) |
£26.00 | £19.00 |
| 50.01-75KG (3 bags/tubs) |
£36.00 | £28.00 |
| 75.01-100KG (4-5 bags/tubs) |
£46.00 | £37.00 |
| 100.01-249KG (6-9 bags/tubs) |
£60.00 | £45.00 |
| 249.01-750KG (10 bags plus) |
£68.00 | £48.00 |
| 750.01KG plus (30 bags plus) |
£75.00 | £55.00 |
| Full Pallets (56 bags/52 tubs) |
£88.00 | Free of charge |
| Next Working Day delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
Delivery Information
- Prices apply to mainland England and Wales. Scottish delivery slight surcharge.
- Orders are packed and dispatched Monday–Friday (excluding weekends & public holidays).
Next Working Day Delivery
- Order before 1PM → same-day dispatch.
- Order after 1PM or on weekends/bank holidays → next working day dispatch.
- You'll receive tracking updates via email/SMS if you provide your details.
Delivery Examples
- Mon before 1PM → Packed Mon, delivered Tue.
- Mon after 1PM → Packed Tues delivered Wed.
- Fri before 1PM → Packed Fri, delivered Mon.
- Fri after 1PM/weekend → Packed Mon, delivered Tues (or Wed after a bank holiday).
- Standard Service: 3–5 working days.
Notes
- Occasional delays due to manufacturing, supply, or courier issues may happen, but we'll keep you informed.
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for the cost of returning goods to The Paving Experts, 20% admin restock fee applies. Need further info, click here.
For further detailed delivery information click here →
How to prepare surfaces for QC10 F
All surfaces should be free from oil, grease, dust or any other visible contaminants.- Remove all loose particles and work on a sound substrate.
- Pre-soak the area with clean water prior to application to aid bond.
- Remove ponded water before applying the product. Good concrete practice should always be observed to enable the mix to be placed into position within 4 minutes.
How to mix QC10 F Rapid Set Flowable Concrete
- Can be mixed mechanically or by hand.
- If by hand, ensure that the mixing is vigorous.
- Mix the inner bag containing the cement with the sand/aggregate.
- Formulated to be mixed to a smooth flowable consistency.
- It is advisable to add a maximum of 2 litres of water initially, mix and if required, add up to a further 0.25 litres.
- It is essential that this product not be over-watered. The addition of excessive water will result in slower strength gain, reduced final compressive strength and the possibility of shrinkage cracking.
- Sand/aggregate contains moisture and the volume of water required will vary depending on the moisture content of the aggregate.
- Mix only enough material to apply within 4 minutes.
- Never remix or add water.
- If the product needs to be applied to walls then the water content can be reduced to obtain a stiffer consistency.
How to apply QC10 F Rapid Set Flowable Concrete
- Pour mixed QC10 F into place (if required lightly trowel to ensure good contact with edges), 60mm below the required surface.
- Once the material has reached an initial set, all horizontal surfaces of the reinstatement, including the ironwork, should be sprayed with Ultracrete SCJ. This will prevent the ingress of water into the reinstatement and promote a good bond. Ensure all vertical substrates are fully covered.
- Clean any mixing equipment with water immediately after use.