Lithofin KF Stain-Stop: For Ceramic and Porcelain Tiles
About the product
Lithofin KF Stain-Stop is a ready-to-use special impregnator that protects absorbent, stain-sensitive unglazed ceramic, porcelain, terracotta and quarry tile surfaces against stains. Prevents penetration of oil, grease and water, making long term care and maintenance easier. Suitable for indoor and outdoor use.
Download Lithofin KF Stain-Stop technical datasheet (pdf) or see the article on sealing patios. If you still need support, get in touch. We’re a small team, but happy to help. 
Lithofin KF Stain-Stop: For Ceramic and Porcelain Tiles
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
About the product
Lithofin KF Stain-Stop is a ready-to-use special impregnator that protects absorbent, stain-sensitive unglazed ceramic, porcelain, terracotta and quarry tile surfaces against stains. Prevents penetration of oil, grease and water, making long term care and maintenance easier. Suitable for indoor and outdoor use.
Download Lithofin KF Stain-Stop technical datasheet (pdf) or see the article on sealing patios. If you still need support, get in touch. We’re a small team, but happy to help.
Lithofin KF Stain-Stop: For Ceramic and Porcelain Tiles
Lithofin KF Stain Stop is a special product from the Lithofin range that has been specifically formulated for ceramics, quarry tiles and porcelain. This ready-to-use special impregnator is solvent based and contains high quality water and oil resistant components.
Lithofin KF Stain-Stop penetrates deeply into the surface of the worktop, slabs or tiles and coats the capillaries with an extremely thin, invisible film. Oil, grease and water are not absorbed into the surface, remaining on the surface of the materials, which means that any dirt or residues can easily be removed without leaving stains.
The effectiveness of Lithofin KF Stain Stop impregnator depends on the amount of product absorbed by the surface. The appearance of the surface material such as your tiles or slabs are either not or only slightly altered in colour.
Lithofin KF Stain Stop is primarily used for protecting unglazed ceramics against stains and for keeping up with every-day maintenance. Lithofin KF Stain Stop is highly recommended for use in kitchens, bathrooms and other areas which may come into contact with water and oil.
Please Note: Lithofin KF Stain-Stop does not or only slightly affect the slip resistance properties of the surface.
Lithofin KF Stain-Stop can be used on:
- Unglazed Ceramics
- Quarry Tiles
- Porcelain
- Terracotta
Lithofin KF Stain-Stop Technical Information:
- Application Temperature: Use between 5°C and 25°C.
- Switch off under floor heating.
- Drying Time: most solvents will evaporate within two hours. The product will be fully effective after approx. 48 hours.
- Coverage: depends on the absorbency of the material.
- Estimates: approximately 40 sqm per 1 Litre bottle
- Durability: up to 5 years in outdoor areas. Indoors, the durability depends on the care products used.
- For regular maintenance, we recommend Lithofin KF Easy-Care.
- Storage: Keep closed, cool and dry.
- Shelf life of up to 3 years.
- Open containers should be used quickly.
- Appearance: liquid, colourless, clear
- This item is perishable and therefore non-returnable
Download Lithofin KF Stain-Stop technical datasheet (pdf)
Please note: Test Lithofin KF Stain Stop on a small area of the surfaces prior to use.
Read more about how to prevent staining and efflorescence on paving in our blog.
- Brand: Lithofin
- SKU: TPE-LITKFFOR3DF3
- Weight: 1.0 kg / 2.2 lb
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
For any advice; technical, product, stock or quantity needed, call our team on 0330 122 1025.
Please see our FAQs for more information.
Lithofin KF Stain-Stop: For Ceramic and Porcelain Tiles
Lithofin KF Stain Stop is a special product from the Lithofin range that has been specifically formulated for ceramics, quarry tiles and porcelain. This ready-to-use special impregnator is solvent based and contains high quality water and oil resistant components.
Lithofin KF Stain-Stop penetrates deeply into the surface of the worktop, slabs or tiles and coats the capillaries with an extremely thin, invisible film. Oil, grease and water are not absorbed into the surface, remaining on the surface of the materials, which means that any dirt or residues can easily be removed without leaving stains.
The effectiveness of Lithofin KF Stain Stop impregnator depends on the amount of product absorbed by the surface. The appearance of the surface material such as your tiles or slabs are either not or only slightly altered in colour.
Lithofin KF Stain Stop is primarily used for protecting unglazed ceramics against stains and for keeping up with every-day maintenance. Lithofin KF Stain Stop is highly recommended for use in kitchens, bathrooms and other areas which may come into contact with water and oil.
Please Note: Lithofin KF Stain-Stop does not or only slightly affect the slip resistance properties of the surface.
Lithofin KF Stain-Stop can be used on:
- Unglazed Ceramics
- Quarry Tiles
- Porcelain
- Terracotta
Lithofin KF Stain-Stop Technical Information:
- Application Temperature: Use between 5°C and 25°C.
- Switch off under floor heating.
- Drying Time: most solvents will evaporate within two hours. The product will be fully effective after approx. 48 hours.
- Coverage: depends on the absorbency of the material.
- Estimates: approximately 40 sqm per 1 Litre bottle
- Durability: up to 5 years in outdoor areas. Indoors, the durability depends on the care products used.
- For regular maintenance, we recommend Lithofin KF Easy-Care.
- Storage: Keep closed, cool and dry.
- Shelf life of up to 3 years.
- Open containers should be used quickly.
- Appearance: liquid, colourless, clear
- This item is perishable and therefore non-returnable
Download Lithofin KF Stain-Stop technical datasheet (pdf)
Please note: Test Lithofin KF Stain Stop on a small area of the surfaces prior to use.
Read more about how to prevent staining and efflorescence on paving in our blog.
Lithofin KF Stain Stop Technical information:
| Packaging | 1 L bottle. (5 Litre available on request) |
|---|---|
| Coverage | Coverage approx. up to 40m² per litre, depending on the absorbency of the surface. |
| Storage | Keep closed, cool & dry. Do not store in temperatures above 25°C |
| Shelf life | Up to 3 years |
How to apply Lithofin KF Stain Stop: Directions for Use
The surface to be treated must be completely dry and clean. Where no prior experience exists or in cases of doubt, try the product in an inconspicuous area prior to use. Areas should be treated in sections of approx. 10 to 15m². On highly absorbent surfaces generously and evenly apply Lithofin KF Stain-Stop with a brush or lambs wool roller. On less absorbent surfaces use a brush or a clean cloth. After approximately 20 minutes, apply Lithofin KF Stain-Stop again to ensure that the entire surface is completely saturated. Then carefully remove all surface residues with a cloth. On large areas use a squeegee and a polishing machine with a white pad. Do not allow any product to dry on the surface. On highly absorbent surfaces, a second application after approx. 24 hours may be necessary. Please note: The liquid product must fully sink into the surface. Do not allow the product to dry on the surface, as dry residue will not be removable after 6 hours. Always try the product in an inconspicuous area prior to use. Lithofin KF Stain-Stop can only be used on absorbent and completely dry surfaces. Glass, ceramics, wood, and other surfaces sensitive to solvents must be protected against splashes.Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
Lithofin KF Stain-Stop: For Ceramic and Porcelain Tiles
Lithofin KF Stain Stop is a special product from the Lithofin range that has been specifically formulated for ceramics, quarry tiles and porcelain. This ready-to-use special impregnator is solvent based and contains high quality water and oil resistant components.
Lithofin KF Stain-Stop penetrates deeply into the surface of the worktop, slabs or tiles and coats the capillaries with an extremely thin, invisible film. Oil, grease and water are not absorbed into the surface, remaining on the surface of the materials, which means that any dirt or residues can easily be removed without leaving stains.
The effectiveness of Lithofin KF Stain Stop impregnator depends on the amount of product absorbed by the surface. The appearance of the surface material such as your tiles or slabs are either not or only slightly altered in colour.
Lithofin KF Stain Stop is primarily used for protecting unglazed ceramics against stains and for keeping up with every-day maintenance. Lithofin KF Stain Stop is highly recommended for use in kitchens, bathrooms and other areas which may come into contact with water and oil.
Please Note: Lithofin KF Stain-Stop does not or only slightly affect the slip resistance properties of the surface.
Lithofin KF Stain-Stop can be used on:
- Unglazed Ceramics
- Quarry Tiles
- Porcelain
- Terracotta
Lithofin KF Stain-Stop Technical Information:
- Application Temperature: Use between 5°C and 25°C.
- Switch off under floor heating.
- Drying Time: most solvents will evaporate within two hours. The product will be fully effective after approx. 48 hours.
- Coverage: depends on the absorbency of the material.
- Estimates: approximately 40 sqm per 1 Litre bottle
- Durability: up to 5 years in outdoor areas. Indoors, the durability depends on the care products used.
- For regular maintenance, we recommend Lithofin KF Easy-Care.
- Storage: Keep closed, cool and dry.
- Shelf life of up to 3 years.
- Open containers should be used quickly.
- Appearance: liquid, colourless, clear
- This item is perishable and therefore non-returnable
Download Lithofin KF Stain-Stop technical datasheet (pdf)
Please note: Test Lithofin KF Stain Stop on a small area of the surfaces prior to use.
Read more about how to prevent staining and efflorescence on paving in our blog.
Lithofin KF Stain Stop Technical information:
| Packaging | 1 L bottle. (5 Litre available on request) |
|---|---|
| Coverage | Coverage approx. up to 40m² per litre, depending on the absorbency of the surface. |
| Storage | Keep closed, cool & dry. Do not store in temperatures above 25°C |
| Shelf life | Up to 3 years |
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.