UltraScape Porcelpoint - Flowable Porcelain Grout: Stone Grey
About the product
“Best Paving Grout for Porcelain Tiles & Slabs”
UltraScape PorcelPoint Stone Grey Porcelain Paving Grout is designed specifically for porcelain paving, PorcelPoint is a super-fine, rapid-set grout ideal for joints 2–50mm wide and 20–200mm deep. It creates strong, impermeable joints perfect for patios and paved areas. Supplied in a handy 20KG tub (just add 3.4L of water), PorcelPoint sets in just 15 minutes, is walkable in an hour, and can handle light vehicle traffic after four hours.
Available in Stone Grey, or click here for [Limestone]. Fully compliant with BS 7533 standards.
Do I need to pre-seal my paving?
It is not absolutely necessary, but if you’re using very porous stone like slate, black/blue limestone, or honed black granite, pre-sealing can help to prevent grout staining. Try ProJoint Pre-Grout Sealer – it’s invisible, easy to apply, and works on all natural stone and concrete paving.
Got a question about Porcelpoint? We have the most comprehensive information online see our FAQ’s, read the technical datasheet (pdf), or drop us a message through our contact form—we’ll get back to you by email or phone as soon as we can. Or alternatively, call ☎️ 0330 122 1025 – we’re a small team, but happy to help. 😊✨
UltraScape Porcelpoint - Flowable Porcelain Grout: Stone Grey
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
For Highlands, Guernsey, Jersey, Isle of Man, and Isle of Wight – call 0330 122 1025.
About the product
“Best Paving Grout for Porcelain Tiles & Slabs”
UltraScape PorcelPoint Stone Grey Porcelain Paving Grout is designed specifically for porcelain paving, PorcelPoint is a super-fine, rapid-set grout ideal for joints 2–50mm wide and 20–200mm deep. It creates strong, impermeable joints perfect for patios and paved areas. Supplied in a handy 20KG tub (just add 3.4L of water), PorcelPoint sets in just 15 minutes, is walkable in an hour, and can handle light vehicle traffic after four hours.
Available in Stone Grey, or click here for [Limestone]. Fully compliant with BS 7533 standards.
Do I need to pre-seal my paving?
It is not absolutely necessary, but if you’re using very porous stone like slate, black/blue limestone, or honed black granite, pre-sealing can help to prevent grout staining. Try ProJoint Pre-Grout Sealer – it’s invisible, easy to apply, and works on all natural stone and concrete paving.
Got a question about Porcelpoint? We have the most comprehensive information online see our FAQ’s, read the technical datasheet (pdf), or drop us a message through our contact form—we’ll get back to you by email or phone as soon as we can. Or alternatively, call ☎️ 0330 122 1025 – we’re a small team, but happy to help. 😊✨
UltraScape Porcelpoint - Flowable Porcelain Grout, Stone Grey
“Best Paving Grout for Porcelain Tiles & Slabs”
UltraScape Porcelpoint is a flowable rapid set grout that has been specifically designed for use with porcelain paving & tiles. Porcelpoint is ideal for pointing joints in patios and all types of paving slabs, where an impermeable rigid joint is needed.
Porcelpoint comes in a 20KG tub, in two colours Stone Grey & Limestone, this superior porcelain grout is super fine; even finer in appearance than Flowpoint Fine. Available in joint widths from 2-50mm’s, it is open to pedestrians after just one hour, and cars after four hours. Porcelpoint sets in just 15 minutes, is simple to use, you just add 3.4 litres of water to one 20KG tub.
UltraScape Porcelpoint conforms to the strict demands of BS 7533.
- Unit Size: 20KG Bucket (40 on a full pallet)
- Colours: Stone Grey (also available in Limestone)
- Joint Widths: 2-50mm | Depths: 20mm, up to 200mm in one application
- Open to foot traffic: 1 hour
- Open to vehicular traffic: 4 hours
- Set Time: 15 minutes at 20°C
- Grout designed specifically for porcelain
- Just add water - 3.4 litres per 20KG
- Storage Store in a cool, dry and frost free area at temperatures between 5°C and 30°C
- Yield 11.12 litres approx, per 20kg bucket
- Workability 5-15 minutes
- Shelf life 8 months from the date of manufacture printed on this bucket, unopened. Do not store outside, store inside, off the ground, away from drafts, cold and damp.
- High temperatures and high humidity will reduce shelf life.
- Bond (Adhesion strength) >1.5N/mm² after 28 days
- Compressive strength 49.6N/mm2 after 38 days
- Flexural strength 7.1N/mm² after 28 days
- Tensile strength 3.91N/mm2 after 28 days
- UltraScape Porcelpoint conforms to the strict demands of BS 7533.
UltraScape Porcelpoint Application
UltraScape Porcelpoint has been designed to be a rapid set grout with high fluid consistency, which allows early trafficking, and conforms to the strict demands of BS 7533. Porcelpoint is ideal for patios and paved areas where a rigid or bound void-free joint is required. This superior, fine grade grout is suitable for patios, paths, paved areas, driveways, town centre pedestrian schemes and carriageways. UltraScape Porcelpoint has been designed specifcally for use with porcelain paving slabs, tiles and stone.
UltraScape Porcelpoint Technical Information
UltraScape Porcelpoint is supplied as a pre-mixed dry-pack, which only requires the addition of water on-site. Porcelpoint can fill joints from 2mm to 50mm wide, with a minimum target depth of 20mm, up to 200mm in one application. This highly fluid grout achieves a final compressive strength of 49.6N/mm’ (results achieved using 3.4 litres of water per 20kg bucket), and will reach initial set in 30 minutes. Porcelpoint porcelain paving grout will accept light foot traffic after just one hour, and cars after four hours (dependent upon temperature).
How to Mix & Apply UltraScape Porcelpoint - Flowable Porcelain Grout
Ensure that the paving joints are free from debris and all ponded water has been removed. The paving surface and joints must be pre-misted with water and kept damp until the jointing process has been completed. A 20KG bucket requires 3.4 litres of water and must be mixed for between 3 to 5 minutes until a smooth lump-free consistency has been achieved.
Once mixed, apply Porcelpoint without delay, it must be carefully forced into the joints using a suitable neoprene squeegee. The paving mortar should be constantly moved across the surface to repeatedly top up joints, as the mortar may slump following its initial placement. Use a neoprene squeegee to remove as much mortar as possible from the surface. The surface must be kept constantly damp using a soft spray of water. When the jointing mortar has hardened sufficiently, or achieved its initial set the paving surface must be cleaned using a brush and copious amounts of water. Cleaning must be carried out thoroughly and no mortar must be allowed to remain on the surface of the paving. We recommend an initial washdown to remove the bulk of the grout, and a final wash to remove any residue left over.
How long do I have to use up mixed UltraScape Porcelpoint?
Once mixed, Ultrascape Porcelpoint has approximately 5-15 minutes depending on the outside ambient temperature, to be used up.
UltraScape Porcelpoint Precautions
Please note that a small trial should be done to ensure compatibility with the tiles, paving or stone being used as the manufacturer lnstarmac cannot test all tile/stone types. Wash all tools with clean water frequently. Mix only enough material to apply in 4 minutes, we recommend one bucket at a time. Never remix or add extra water. Wear protective clothing, and avoid skin and eye contact - please note that wet cement can burn the skin.
It is important to remember that cool temperatures can retard, and warm temperatures will accelerate both the workability of the grout and set time. Care should be taken when using the product near drainage. You will need to make sure you have a run-off to take any excess grout away, such as lifting an area of grass, as it must not be allowed to go down a drain and into the watercourse. Ultrascape Porcelpoint is supplied in a bag within a bucket, please check the colour printed on the bag, matches the lid colour before use.
What is UltraScape Porcelpoint - Flowable Porcelain Grout?
UltraScape Porcelpoint is a fluid, rapid-setting flowable porcelain grout that is applied as a wet slurry to quickly point patios, paved areas, terraces and paths. Ideal for both domestic and commercial paving projects,
UltraScape Porcelpoint is supplied as a pre-mixed dry-pack in a bag within a 20KG tub, that just needs the addition of 3.4 litres of water. Porcelpoint fills paving joints from 2 to 50mm’s wide, with a minimum target depth of 20mm, up to 200mm in one application.
Porcelpoint is a really fluid grout that reaches its initial set in just 30 minutes. Porcelpoint porcelain paving grout will accept light foot traffic after just one hour, and cars after four hours (dependent upon temperature).
What is UltraScape Porcelpoint used for?
UltraScape Porcelpoint is a fast set flowable, fine paving grout for grouting patios and paved areas, particularly for porcelain that needs a finer joint. Porcelpoint can accommodate joints from 2 to 50mm’s wide, with a minimum depth of 20mm, up to 200mm in one application. Porcelpoint is ideal for paved areas which are rigid or bound, and where a void-free joint is needed. This rapid set paving grout can be used with all types of natural stone, and porcelain.
Use Porcelpoint alongside the UltraScape BS 7533 Mortar Paving System, a range of high performance materials that meet and exceed the strict demands of BS 7533. Including a rapid strength fine bedding concrete - EcoBed, and paving priming slurry - Pro-Prime.
What colours does UltraScape Porcelpoint come in?
UltraScape Porcelpoint comes in two beautiful colours, Stone Grey & Limestone.
What is the Shelf Life for UltraScape Porcelpoint?
Shelf life from date of manufacture printed on the UltraScape Porcelpoint bucket, unopened in the above conditions, for sealed buckets is 8 months. Please note: the use of this product after the end of the declared storage period may increase the risk of an allergic reaction.
- Brand: Instarmac
- SKU: TPE-PORCELPTSG
- Weight: 20.0 kg / 44.09 lb
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
For any advice; technical, product, stock or quantity needed, call our team on 0330 122 1025.
Please see our FAQs for more information.
UltraScape Porcelpoint - Flowable Porcelain Grout, Stone Grey
“Best Paving Grout for Porcelain Tiles & Slabs”
UltraScape Porcelpoint is a flowable rapid set grout that has been specifically designed for use with porcelain paving & tiles. Porcelpoint is ideal for pointing joints in patios and all types of paving slabs, where an impermeable rigid joint is needed.
Porcelpoint comes in a 20KG tub, in two colours Stone Grey & Limestone, this superior porcelain grout is super fine; even finer in appearance than Flowpoint Fine. Available in joint widths from 2-50mm’s, it is open to pedestrians after just one hour, and cars after four hours. Porcelpoint sets in just 15 minutes, is simple to use, you just add 3.4 litres of water to one 20KG tub.
UltraScape Porcelpoint conforms to the strict demands of BS 7533.
- Unit Size: 20KG Bucket (40 on a full pallet)
- Colours: Stone Grey (also available in Limestone)
- Joint Widths: 2-50mm | Depths: 20mm, up to 200mm in one application
- Open to foot traffic: 1 hour
- Open to vehicular traffic: 4 hours
- Set Time: 15 minutes at 20°C
- Grout designed specifically for porcelain
- Just add water - 3.4 litres per 20KG
- Storage Store in a cool, dry and frost free area at temperatures between 5°C and 30°C
- Yield 11.12 litres approx, per 20kg bucket
- Workability 5-15 minutes
- Shelf life 8 months from the date of manufacture printed on this bucket, unopened. Do not store outside, store inside, off the ground, away from drafts, cold and damp.
- High temperatures and high humidity will reduce shelf life.
- Bond (Adhesion strength) >1.5N/mm² after 28 days
- Compressive strength 49.6N/mm2 after 38 days
- Flexural strength 7.1N/mm² after 28 days
- Tensile strength 3.91N/mm2 after 28 days
- UltraScape Porcelpoint conforms to the strict demands of BS 7533.
UltraScape Porcelpoint Application
UltraScape Porcelpoint has been designed to be a rapid set grout with high fluid consistency, which allows early trafficking, and conforms to the strict demands of BS 7533. Porcelpoint is ideal for patios and paved areas where a rigid or bound void-free joint is required. This superior, fine grade grout is suitable for patios, paths, paved areas, driveways, town centre pedestrian schemes and carriageways. UltraScape Porcelpoint has been designed specifcally for use with porcelain paving slabs, tiles and stone.
UltraScape Porcelpoint Technical Information
UltraScape Porcelpoint is supplied as a pre-mixed dry-pack, which only requires the addition of water on-site. Porcelpoint can fill joints from 2mm to 50mm wide, with a minimum target depth of 20mm, up to 200mm in one application. This highly fluid grout achieves a final compressive strength of 49.6N/mm’ (results achieved using 3.4 litres of water per 20kg bucket), and will reach initial set in 30 minutes. Porcelpoint porcelain paving grout will accept light foot traffic after just one hour, and cars after four hours (dependent upon temperature).
How to Mix & Apply UltraScape Porcelpoint - Flowable Porcelain Grout
Ensure that the paving joints are free from debris and all ponded water has been removed. The paving surface and joints must be pre-misted with water and kept damp until the jointing process has been completed. A 20KG bucket requires 3.4 litres of water and must be mixed for between 3 to 5 minutes until a smooth lump-free consistency has been achieved.
Once mixed, apply Porcelpoint without delay, it must be carefully forced into the joints using a suitable neoprene squeegee. The paving mortar should be constantly moved across the surface to repeatedly top up joints, as the mortar may slump following its initial placement. Use a neoprene squeegee to remove as much mortar as possible from the surface. The surface must be kept constantly damp using a soft spray of water. When the jointing mortar has hardened sufficiently, or achieved its initial set the paving surface must be cleaned using a brush and copious amounts of water. Cleaning must be carried out thoroughly and no mortar must be allowed to remain on the surface of the paving. We recommend an initial washdown to remove the bulk of the grout, and a final wash to remove any residue left over.
How long do I have to use up mixed UltraScape Porcelpoint?
Once mixed, Ultrascape Porcelpoint has approximately 5-15 minutes depending on the outside ambient temperature, to be used up.
UltraScape Porcelpoint Precautions
Please note that a small trial should be done to ensure compatibility with the tiles, paving or stone being used as the manufacturer lnstarmac cannot test all tile/stone types. Wash all tools with clean water frequently. Mix only enough material to apply in 4 minutes, we recommend one bucket at a time. Never remix or add extra water. Wear protective clothing, and avoid skin and eye contact - please note that wet cement can burn the skin.
It is important to remember that cool temperatures can retard, and warm temperatures will accelerate both the workability of the grout and set time. Care should be taken when using the product near drainage. You will need to make sure you have a run-off to take any excess grout away, such as lifting an area of grass, as it must not be allowed to go down a drain and into the watercourse. Ultrascape Porcelpoint is supplied in a bag within a bucket, please check the colour printed on the bag, matches the lid colour before use.
What is UltraScape Porcelpoint - Flowable Porcelain Grout?
UltraScape Porcelpoint is a fluid, rapid-setting flowable porcelain grout that is applied as a wet slurry to quickly point patios, paved areas, terraces and paths. Ideal for both domestic and commercial paving projects,
UltraScape Porcelpoint is supplied as a pre-mixed dry-pack in a bag within a 20KG tub, that just needs the addition of 3.4 litres of water. Porcelpoint fills paving joints from 2 to 50mm’s wide, with a minimum target depth of 20mm, up to 200mm in one application.
Porcelpoint is a really fluid grout that reaches its initial set in just 30 minutes. Porcelpoint porcelain paving grout will accept light foot traffic after just one hour, and cars after four hours (dependent upon temperature).
What is UltraScape Porcelpoint used for?
UltraScape Porcelpoint is a fast set flowable, fine paving grout for grouting patios and paved areas, particularly for porcelain that needs a finer joint. Porcelpoint can accommodate joints from 2 to 50mm’s wide, with a minimum depth of 20mm, up to 200mm in one application. Porcelpoint is ideal for paved areas which are rigid or bound, and where a void-free joint is needed. This rapid set paving grout can be used with all types of natural stone, and porcelain.
Use Porcelpoint alongside the UltraScape BS 7533 Mortar Paving System, a range of high performance materials that meet and exceed the strict demands of BS 7533. Including a rapid strength fine bedding concrete - EcoBed, and paving priming slurry - Pro-Prime.
What colours does UltraScape Porcelpoint come in?
UltraScape Porcelpoint comes in two beautiful colours, Stone Grey & Limestone.
What is the Shelf Life for UltraScape Porcelpoint?
Shelf life from date of manufacture printed on the UltraScape Porcelpoint bucket, unopened in the above conditions, for sealed buckets is 8 months. Please note: the use of this product after the end of the declared storage period may increase the risk of an allergic reaction.
UltraScape Porcelpoint Technical Information
UltraScape Porcelpoint is supplied as a pre-mixed dry-pack, which only requires the addition of water on-site. Porcelpoint can fill joints from 2mm to 50mm wide, with a minimum target depth of 20mm, up to 200mm in one application. This highly fluid grout achieves a final compressive strength of 49.6N/mm’ (results achieved using 3.4 litres of water per 20kg bucket), and will reach initial set in 30 minutes. Porcelpoint porcelain paving grout will accept light foot traffic after just one hour, and cars after four hours (dependent upon temperature). UltraScape Porcelpoint conforms to the strict demands of BS 7533.- Unit Size: 20KG Bucket
- Colours: Stone Grey & Limestone
- Joint Width: 2-50mm
- Open to foot traffic: 1 hour
- Open to vehicular traffic: 4 hours
- Set Time: 15 minutes at 20°C
- Grout designed specifically for porcelain
- Just add water - 3.4 litres per 20KG
- Storage Store in a cool, dry and frost free area at temperatures between 5°C and 30°C
- Yield 11.12 litres approx, per 20kg bucket
- Workability 5-15 minutes
- Shelf life 8 months from the date of manufacture printed on this bucket, unopened. Do not store outside, store inside, off the ground, away from drafts, cold and damp.
- High temperatures and high humidity will reduce shelf life.
- Bond (Adhesion strength) >1.5N/mm² after 28 days
- Compressive strength 49.6N/mm2 after 38 days
- Flexural strength 7.1N/mm² after 28 days
- Tensile strength 3.91N/mm2 after 28 days
- UltraScape Porcelpoint conforms to the strict demands of BS 7533.
UltraScape Porcelpoint – Mixing & Application Method
- Ensure paving joints are free from debris and all ponded water is removed.
- Pre-mist the paving surface and joints with water and keep damp throughout the jointing process.
- A 20kg bucket requires 3.4 litres of water.
- Mix for 3–5 minutes until a smooth, lump-free consistency is achieved.
- Apply immediately after mixing – do not delay.
- Force the grout firmly into the joints using a suitable neoprene squeegee.
- Continuously move mortar across the surface to top up joints, as slight slump may occur after placement.
- Remove as much excess mortar as possible using a neoprene squeegee.
- Keep the surface constantly damp using a soft spray of water.
- Once the grout has achieved its initial set, clean thoroughly using a brush and plenty of water.
- Carry out an initial washdown to remove bulk grout, followed by a final wash to remove any remaining residue.
Workability
- Once mixed, Porcelpoint has approximately 5–15 minutes of working time, depending on temperature.
Precautions
- Carry out a small trial area to ensure compatibility with your tiles, paving, or stone.
- Wash tools frequently with clean water.
- Mix only enough material to apply within 4 minutes – we recommend one bucket at a time.
- Never remix or add extra water.
- Wear protective clothing and avoid skin and eye contact (wet cement can cause burns).
- Cool temperatures slow curing; warm temperatures accelerate workability and set time.
- Ensure suitable run-off when working near drainage – grout must not enter drains or watercourses.
- Porcelpoint is supplied in a bag within a bucket – always check the bag colour matches the lid colour before use.
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
UltraScape Porcelpoint - Flowable Porcelain Grout, Stone Grey
“Best Paving Grout for Porcelain Tiles & Slabs”
UltraScape Porcelpoint is a flowable rapid set grout that has been specifically designed for use with porcelain paving & tiles. Porcelpoint is ideal for pointing joints in patios and all types of paving slabs, where an impermeable rigid joint is needed.
Porcelpoint comes in a 20KG tub, in two colours Stone Grey & Limestone, this superior porcelain grout is super fine; even finer in appearance than Flowpoint Fine. Available in joint widths from 2-50mm’s, it is open to pedestrians after just one hour, and cars after four hours. Porcelpoint sets in just 15 minutes, is simple to use, you just add 3.4 litres of water to one 20KG tub.
UltraScape Porcelpoint conforms to the strict demands of BS 7533.
- Unit Size: 20KG Bucket (40 on a full pallet)
- Colours: Stone Grey (also available in Limestone)
- Joint Widths: 2-50mm | Depths: 20mm, up to 200mm in one application
- Open to foot traffic: 1 hour
- Open to vehicular traffic: 4 hours
- Set Time: 15 minutes at 20°C
- Grout designed specifically for porcelain
- Just add water - 3.4 litres per 20KG
- Storage Store in a cool, dry and frost free area at temperatures between 5°C and 30°C
- Yield 11.12 litres approx, per 20kg bucket
- Workability 5-15 minutes
- Shelf life 8 months from the date of manufacture printed on this bucket, unopened. Do not store outside, store inside, off the ground, away from drafts, cold and damp.
- High temperatures and high humidity will reduce shelf life.
- Bond (Adhesion strength) >1.5N/mm² after 28 days
- Compressive strength 49.6N/mm2 after 38 days
- Flexural strength 7.1N/mm² after 28 days
- Tensile strength 3.91N/mm2 after 28 days
- UltraScape Porcelpoint conforms to the strict demands of BS 7533.
UltraScape Porcelpoint Application
UltraScape Porcelpoint has been designed to be a rapid set grout with high fluid consistency, which allows early trafficking, and conforms to the strict demands of BS 7533. Porcelpoint is ideal for patios and paved areas where a rigid or bound void-free joint is required. This superior, fine grade grout is suitable for patios, paths, paved areas, driveways, town centre pedestrian schemes and carriageways. UltraScape Porcelpoint has been designed specifcally for use with porcelain paving slabs, tiles and stone.
UltraScape Porcelpoint Technical Information
UltraScape Porcelpoint is supplied as a pre-mixed dry-pack, which only requires the addition of water on-site. Porcelpoint can fill joints from 2mm to 50mm wide, with a minimum target depth of 20mm, up to 200mm in one application. This highly fluid grout achieves a final compressive strength of 49.6N/mm’ (results achieved using 3.4 litres of water per 20kg bucket), and will reach initial set in 30 minutes. Porcelpoint porcelain paving grout will accept light foot traffic after just one hour, and cars after four hours (dependent upon temperature).
How to Mix & Apply UltraScape Porcelpoint - Flowable Porcelain Grout
Ensure that the paving joints are free from debris and all ponded water has been removed. The paving surface and joints must be pre-misted with water and kept damp until the jointing process has been completed. A 20KG bucket requires 3.4 litres of water and must be mixed for between 3 to 5 minutes until a smooth lump-free consistency has been achieved.
Once mixed, apply Porcelpoint without delay, it must be carefully forced into the joints using a suitable neoprene squeegee. The paving mortar should be constantly moved across the surface to repeatedly top up joints, as the mortar may slump following its initial placement. Use a neoprene squeegee to remove as much mortar as possible from the surface. The surface must be kept constantly damp using a soft spray of water. When the jointing mortar has hardened sufficiently, or achieved its initial set the paving surface must be cleaned using a brush and copious amounts of water. Cleaning must be carried out thoroughly and no mortar must be allowed to remain on the surface of the paving. We recommend an initial washdown to remove the bulk of the grout, and a final wash to remove any residue left over.
How long do I have to use up mixed UltraScape Porcelpoint?
Once mixed, Ultrascape Porcelpoint has approximately 5-15 minutes depending on the outside ambient temperature, to be used up.
UltraScape Porcelpoint Precautions
Please note that a small trial should be done to ensure compatibility with the tiles, paving or stone being used as the manufacturer lnstarmac cannot test all tile/stone types. Wash all tools with clean water frequently. Mix only enough material to apply in 4 minutes, we recommend one bucket at a time. Never remix or add extra water. Wear protective clothing, and avoid skin and eye contact - please note that wet cement can burn the skin.
It is important to remember that cool temperatures can retard, and warm temperatures will accelerate both the workability of the grout and set time. Care should be taken when using the product near drainage. You will need to make sure you have a run-off to take any excess grout away, such as lifting an area of grass, as it must not be allowed to go down a drain and into the watercourse. Ultrascape Porcelpoint is supplied in a bag within a bucket, please check the colour printed on the bag, matches the lid colour before use.
What is UltraScape Porcelpoint - Flowable Porcelain Grout?
UltraScape Porcelpoint is a fluid, rapid-setting flowable porcelain grout that is applied as a wet slurry to quickly point patios, paved areas, terraces and paths. Ideal for both domestic and commercial paving projects,
UltraScape Porcelpoint is supplied as a pre-mixed dry-pack in a bag within a 20KG tub, that just needs the addition of 3.4 litres of water. Porcelpoint fills paving joints from 2 to 50mm’s wide, with a minimum target depth of 20mm, up to 200mm in one application.
Porcelpoint is a really fluid grout that reaches its initial set in just 30 minutes. Porcelpoint porcelain paving grout will accept light foot traffic after just one hour, and cars after four hours (dependent upon temperature).
What is UltraScape Porcelpoint used for?
UltraScape Porcelpoint is a fast set flowable, fine paving grout for grouting patios and paved areas, particularly for porcelain that needs a finer joint. Porcelpoint can accommodate joints from 2 to 50mm’s wide, with a minimum depth of 20mm, up to 200mm in one application. Porcelpoint is ideal for paved areas which are rigid or bound, and where a void-free joint is needed. This rapid set paving grout can be used with all types of natural stone, and porcelain.
Use Porcelpoint alongside the UltraScape BS 7533 Mortar Paving System, a range of high performance materials that meet and exceed the strict demands of BS 7533. Including a rapid strength fine bedding concrete - EcoBed, and paving priming slurry - Pro-Prime.
What colours does UltraScape Porcelpoint come in?
UltraScape Porcelpoint comes in two beautiful colours, Stone Grey & Limestone.
What is the Shelf Life for UltraScape Porcelpoint?
Shelf life from date of manufacture printed on the UltraScape Porcelpoint bucket, unopened in the above conditions, for sealed buckets is 8 months. Please note: the use of this product after the end of the declared storage period may increase the risk of an allergic reaction.
UltraScape Porcelpoint Technical Information
UltraScape Porcelpoint is supplied as a pre-mixed dry-pack, which only requires the addition of water on-site. Porcelpoint can fill joints from 2mm to 50mm wide, with a minimum target depth of 20mm, up to 200mm in one application. This highly fluid grout achieves a final compressive strength of 49.6N/mm’ (results achieved using 3.4 litres of water per 20kg bucket), and will reach initial set in 30 minutes. Porcelpoint porcelain paving grout will accept light foot traffic after just one hour, and cars after four hours (dependent upon temperature). UltraScape Porcelpoint conforms to the strict demands of BS 7533.- Unit Size: 20KG Bucket
- Colours: Stone Grey & Limestone
- Joint Width: 2-50mm
- Open to foot traffic: 1 hour
- Open to vehicular traffic: 4 hours
- Set Time: 15 minutes at 20°C
- Grout designed specifically for porcelain
- Just add water - 3.4 litres per 20KG
- Storage Store in a cool, dry and frost free area at temperatures between 5°C and 30°C
- Yield 11.12 litres approx, per 20kg bucket
- Workability 5-15 minutes
- Shelf life 8 months from the date of manufacture printed on this bucket, unopened. Do not store outside, store inside, off the ground, away from drafts, cold and damp.
- High temperatures and high humidity will reduce shelf life.
- Bond (Adhesion strength) >1.5N/mm² after 28 days
- Compressive strength 49.6N/mm2 after 38 days
- Flexural strength 7.1N/mm² after 28 days
- Tensile strength 3.91N/mm2 after 28 days
- UltraScape Porcelpoint conforms to the strict demands of BS 7533.
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
| Weight | Price | Volume |
|---|---|---|
| 0-6KG | £8.00+VAT | 1 x Small Parcel (e.g. blade) |
| 6.1-13KG | £9.00+VAT | 1 Small Bag / Tub |
| 13.01-25KG | £10.00+VAT | 1 Large Bag / Tub |
| 25.01-50KG | £19.00+VAT | 2 x Bags / Tubs |
| 50.01-75KG | £28.00+VAT | 3 x Bags / Tubs |
| 75.01-100KG | £37.00+VAT | 4-5 Bags / Tubs |
| 100.01-249KG | £45.00+VAT | 6-9 Bags / Tubs |
| 249.01-750KG | £48.00+VAT | 10-30 Bags / Tubs |
| 750.01-1400KG | £55.00+VAT | 31 - 55 Bags |
| 1400.01KG + (Full Pallets FOC*) | £0.00 | 52 Tubs / 56 Bags |
| Next Day Delivery (Premium 1-2 Working Day Service) | +avg. £5-10 Extra. Click here for prices |
|---|---|
| Scotland Delivery Service (Deliveries into some parts of Scotland can take 8-10 working days) | Click here for prices |
| Local Delivery & Click & Collect: | Email: orders@thepavingexperts.co.uk |
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £88 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
UltraScape Porcelpoint – Mixing & Application Method
- Ensure paving joints are free from debris and all ponded water is removed.
- Pre-mist the paving surface and joints with water and keep damp throughout the jointing process.
- A 20kg bucket requires 3.4 litres of water.
- Mix for 3–5 minutes until a smooth, lump-free consistency is achieved.
- Apply immediately after mixing – do not delay.
- Force the grout firmly into the joints using a suitable neoprene squeegee.
- Continuously move mortar across the surface to top up joints, as slight slump may occur after placement.
- Remove as much excess mortar as possible using a neoprene squeegee.
- Keep the surface constantly damp using a soft spray of water.
- Once the grout has achieved its initial set, clean thoroughly using a brush and plenty of water.
- Carry out an initial washdown to remove bulk grout, followed by a final wash to remove any remaining residue.
Workability
- Once mixed, Porcelpoint has approximately 5–15 minutes of working time, depending on temperature.
Precautions
- Carry out a small trial area to ensure compatibility with your tiles, paving, or stone.
- Wash tools frequently with clean water.
- Mix only enough material to apply within 4 minutes – we recommend one bucket at a time.
- Never remix or add extra water.
- Wear protective clothing and avoid skin and eye contact (wet cement can cause burns).
- Cool temperatures slow curing; warm temperatures accelerate workability and set time.
- Ensure suitable run-off when working near drainage – grout must not enter drains or watercourses.
- Porcelpoint is supplied in a bag within a bucket – always check the bag colour matches the lid colour before use.